[PATCH 6/8] arm64: dts: qcom: msm8916-samsung-gt58: Add touchscreen

[Nikita Travkin]

From: Siddharth Manthan <siddharth.manthan@xxxxxxxxx>

gt58 uses Zinitix bt532 touch controller.
Add it to device tree.

Signed-off-by: Siddharth Manthan <siddharth.manthan@xxxxxxxxx>
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
 .../boot/dts/qcom/msm8916-samsung-gt58.dts    | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 37140d041a22..fcf516888739 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -9,6 +9,19 @@ / {
 	compatible = "samsung,gt58", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
@@ -18,7 +31,43 @@ vibrator {
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+
+		vcca-supply = <&reg_vdd_tsp>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &msmgpio {
+	reg_tsp_en_default: reg-tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	vibrator_en_default: vibrator-en-default-state {
 		pins = "gpio76";
 		function = "gpio";
-- 
2.38.1