[PATCH v2 2/8] arm64: dts: qcom: sc7280: audioreach: Add sound node
From: Srinivasa Rao Mandadapu
Date: Thu Jan 05 2023 - 08:39:01 EST
Add sound node for sc7280 based audioreach platforms.
Include audioreach dtsi into crd-rev3 platform specific dts file.
Also remove phandle to sound node, as audio routing is same as
audioreach specific dtsi file.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 25 +----
.../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 109 +++++++++++++++++++++
2 files changed, 110 insertions(+), 24 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index b024626..aea8cbd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,7 +8,7 @@
/dts-v1/;
#include "sc7280-idp.dtsi"
-#include "sc7280-audio-idp.dtsi"
+#include "sc7280-herobrine-audioreach-wcd9385.dtsi"
#include "sc7280-idp-ec-h1.dtsi"
/ {
@@ -88,29 +88,6 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
-&sound {
- audio-routing =
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS1",
- "VA DMIC1", "MIC BIAS1",
- "VA DMIC2", "MIC BIAS3",
- "VA DMIC3", "MIC BIAS3",
- "TX SWR_ADC0", "ADC1_OUTPUT",
- "TX SWR_ADC1", "ADC2_OUTPUT",
- "TX SWR_ADC2", "ADC3_OUTPUT",
- "TX SWR_DMIC0", "DMIC1_OUTPUT",
- "TX SWR_DMIC1", "DMIC2_OUTPUT",
- "TX SWR_DMIC2", "DMIC3_OUTPUT",
- "TX SWR_DMIC3", "DMIC4_OUTPUT",
- "TX SWR_DMIC4", "DMIC5_OUTPUT",
- "TX SWR_DMIC5", "DMIC6_OUTPUT",
- "TX SWR_DMIC6", "DMIC7_OUTPUT",
- "TX SWR_DMIC7", "DMIC8_OUTPUT";
-};
-
&wcd9385 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
new file mode 100644
index 0000000..e1fe56c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ * along with ADSP
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+/{
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "SC7280-AUDIOREACH";
+ adsp-mode;
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "WCD9385 Playback";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "WCD9385 Capture";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "Amplifier Playback";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&q6apmbedai SECONDARY_MI2S_RX>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+};
--
2.7.4