Re: [PATCH net-next v5 4/4] phy: aquantia: Determine rate adaptation support from registers

[Russell King (Oracle)]

On Thu, Jan 05, 2023 at 07:52:06PM +0200, Vladimir Oltean wrote:
> On Thu, Jan 05, 2023 at 12:43:47PM -0500, Sean Anderson wrote:
> > Again, this is to comply with the existing API assumptions. The current
> > code is buggy. Of course, another way around this is to modify the API.
> > I have chosen this route because I don't have a situation like you
> > described. But if support for that is important to you, I encourage you
> > to refactor things.
> 
> I don't think I'm aware of a practical situation like that either.
> I remember seeing some S32G boards with Aquantia PHYs which use 2500BASE-X
> for 2.5G and SGMII for <=1G, but that's about it in terms of protocol switching.

88x3310 can dynamically switch between 10GBASE-R, 5GBASE-R, 2500BASE-X
and SGMII if rate adaption is not being used (and the rate adaption
method it supports in non-MACSEC PHYs is only via increasing the IPG on
the MAC... which currently no MAC driver supports.)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!