Re: [PATCH v2 3/3] serial: 8250_rt288x: Remove unnecessary UART_REG_UNMAPPED

[Jiri Slaby]

On 05. 01. 23, 13:47, Ilpo Järvinen wrote:
> As unmapped registers are at the tail of the array, the ARRAY_SIZE()
> condition will catch them just fine. No need to define special
> value for them.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> ---
>   drivers/tty/serial/8250/8250_rt288x.c | 16 ++++------------
>   1 file changed, 4 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_rt288x.c b/drivers/tty/serial/8250/8250_rt288x.c
> index 3015afb99722..7399fea6dfc1 100644
> --- a/drivers/tty/serial/8250/8250_rt288x.c
> +++ b/drivers/tty/serial/8250/8250_rt288x.c
> @@ -14,10 +14,8 @@
>   
>   #define RT288X_DL	0x28
>   
> -#define UART_REG_UNMAPPED	-1
> -
>   /* Au1x00/RT288x UART hardware has a weird register layout */
> -static const s8 au_io_in_map[8] = {
> +static const s8 au_io_in_map[7] = {
>   	[UART_RX]	= 0,
>   	[UART_IER]	= 2,
>   	[UART_IIR]	= 3,
> @@ -25,18 +23,14 @@ static const s8 au_io_in_map[8] = {
>   	[UART_MCR]	= 6,
>   	[UART_LSR]	= 7,
>   	[UART_MSR]	= 8,
> -	[UART_SCR]	= UART_REG_UNMAPPED,
>   };
>   
> -static const s8 au_io_out_map[8] = {
> +static const s8 au_io_out_map[5] = {

And what about making them u8 at last?

>   	[UART_TX]	= 1,
>   	[UART_IER]	= 2,
>   	[UART_FCR]	= 4,
>   	[UART_LCR]	= 5,
>   	[UART_MCR]	= 6,
> -	[UART_LSR]	= UART_REG_UNMAPPED,
> -	[UART_MSR]	= UART_REG_UNMAPPED,
> -	[UART_SCR]	= UART_REG_UNMAPPED,

thanks,
--
js
suse labs