Re: [PATCH v8 4/4] media: i2c: imx334: update pixel and link frequency

[Jacopo Mondi]

Hi Shravan

On Fri, Jan 06, 2023 at 12:59:31PM +0530, shravan kumar wrote:
> From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
>
> Update pixel_rate and link frequency for 1920x1080@30
> while changing mode.
>
> Add dummy ctrl cases for pixel_rate and link frequency
> to avoid error while changing the modes dynamically
>
> Suggested-by: Sakari Ailus <sakari.ailus@xxxxxx>
> Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/imx334.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> index 0315e1c9541d..8c3ba660abae 100644
> --- a/drivers/media/i2c/imx334.c
> +++ b/drivers/media/i2c/imx334.c
> @@ -50,6 +50,7 @@
>
>  /* CSI2 HW configuration */
>  #define IMX334_LINK_FREQ	891000000

I guess you want to rename this one to  IMX334_LINK_FREQ_891M

Give our previous discussion this seems correct for the following mode

	{
		.width = 3840,
		.height = 2160,
		.hblank = 560,
		.vblank = 2340,
		.vblank_min = 90,
		.vblank_max = 132840,
		.pclk = 594000000,
		.link_freq_idx = 0,
		.reg_list = {
			.num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
			.regs = mode_3840x2160_regs,
		},
	}, {

        duration: (3840+560) * (2160+2340)  / 594000000 = 33sec = 30FPS
        link_freq (3840+560) * (2160+2340)  * 30 * 12 / 8 = 891000000

Which works well if we use min_vblank = 90 for 60FPS

        duration: (3840+560) * (2160+90)  / 594000000 = 0.16 = 60 FPS
        link_freq (3840+560) * (2160+90)  * 60 * 12 / 8 = 891000000


> +#define IMX334_LINK_FREQ_445M	445500000

But this doesn't work well for me

	{
		.width = 1920,
		.height = 1080,
		.hblank = 280,
		.vblank = 1170,
		.vblank_min = 90,
		.vblank_max = 132840,
		.pclk = 74250000,
		.link_freq_idx = 1,
		.reg_list = {
			.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
			.regs = mode_1920x1080_regs,
		},
	},

        duration: (1920+280) * (1080+1170) / 74250000 = 66msec = 16FPS
        link_freq = (1920+280) * (1080+1170) * 60 * 10 / 8 = 371250000

Do you agree with the above or have I missed something ?

I understand you get 30 FPS with the 1920*1080 mode so could you
please check in the newly introduce mode register table what are the
actual values for the blankings and compute the pixel_rate and
link_freq accordingly ?

>  #define IMX334_NUM_DATA_LANES	4
>
>  #define IMX334_REG_MIN		0x00
> @@ -145,6 +146,7 @@ struct imx334 {
>
>  static const s64 link_freq[] = {
>  	IMX334_LINK_FREQ,
> +	IMX334_LINK_FREQ_445M,
>  };
>
>  /* Sensor mode registers */
> @@ -468,7 +470,7 @@ static const struct imx334_mode supported_modes[] = {
>  		.vblank_min = 90,
>  		.vblank_max = 132840,
>  		.pclk = 74250000,
> -		.link_freq_idx = 0,
> +		.link_freq_idx = 1,
>  		.reg_list = {
>  			.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
>  			.regs = mode_1920x1080_regs,
> @@ -598,6 +600,11 @@ static int imx334_update_controls(struct imx334 *imx334,
>  	if (ret)
>  		return ret;
>
> +	ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk,
> +				       mode->pclk, 1, mode->pclk);
> +	if (ret)
> +		return ret;
> +
>  	ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, mode->hblank,
>  				       mode->hblank, 1, mode->hblank);
>  	if (ret)
> @@ -698,6 +705,8 @@ static int imx334_set_ctrl(struct v4l2_ctrl *ctrl)
>  		pm_runtime_put(imx334->dev);
>
>  		break;
> +	case V4L2_CID_PIXEL_RATE:
> +	case V4L2_CID_LINK_FREQ:
>  	case V4L2_CID_HBLANK:

Same question as for patch 1/4: Do we need these safety checks for
read-only controls ?

Thanks
  j

>  		ret = 0;
>  		break;
> --
> 2.34.1
>