Re: [PATCH v2 1/3] ARM: dts: imx7d-remarkable2: Enable the cyttsp5
From: Alistair Francis
Date: Fri Jan 06 2023 - 07:45:27 EST
On Wed, Dec 21, 2022 at 2:51 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
>
> Hello Alistair,
> Hello Marco,
>
> On 20.12.22 14:20, Marco Felsch wrote:
> > Hi Alistair,
> >
> > thanks for your patch, please see below.
> >
> > On 22-12-20, Alistair Francis wrote:
> >> Add support for the cyttsp5 touchscreen controller for the reMarkable 2.
> >>
> >> Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> >> ---
> >> arch/arm/boot/dts/imx7d-remarkable2.dts | 98 +++++++++++++++++++++++++
> >> 1 file changed, 98 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> >> index 8b2f11e85e05..a138b292ec6a 100644
> >> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> >> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> >> @@ -8,6 +8,7 @@
> >> /dts-v1/;
> >>
> >> #include "imx7d.dtsi"
> >> +#include <dt-bindings/input/linux-event-codes.h>
> >>
> >> / {
> >> model = "reMarkable 2.0";
> >> @@ -69,6 +70,18 @@ reg_digitizer: regulator-digitizer {
> >> startup-delay-us = <100000>; /* 100 ms */
> >> };
> >>
> >> + reg_touch: regulator-touch {
> >> + compatible = "regulator-fixed";
> >> + regulator-name = "VDD_3V3_TOUCH";
> >> + regulator-min-microvolt = <3300000>;
> >> + regulator-max-microvolt = <3300000>;
> >> + pinctrl-names = "default", "sleep";
> >> + pinctrl-0 = <&pinctrl_touch_reg>;
> >> + pinctrl-1 = <&pinctrl_touch_reg>;
> >
> > Why do we need a "sleep" state here?
Removed
> >
> >> + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> >> + enable-active-high;
> >> + };
> >> +
> >> wifi_pwrseq: wifi_pwrseq {
> >> compatible = "mmc-pwrseq-simple";
> >> pinctrl-names = "default";
> >> @@ -106,6 +119,68 @@ wacom_digitizer: digitizer@9 {
> >> };
> >> };
> >>
> >> +&i2c3 {
> >> + clock-frequency = <100000>;
> >
> > This can be set to 400kHz, the driver handle the quirks internal.
>
> I would either leave this at 100kHz or increase to the maximum of
> 384 kHz. DT is supposed to describe the hardware and if 400 kHz
> isn't a safe frequency, it should be avoided, even if the Linux
> driver handles it gracefully.
I'm going to leave this at 100kHz then. Let me know if you want me to
bump it to 384kHz instead.
Alistair
>
> Cheers,
> Ahmad
>
> >
> > Regards,
> > Marco
> >
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_i2c3>;
> >> + status = "okay";
> >> +
> >> + touchscreen@24 {
> >> + compatible = "cypress,tt21000";
> >> + reg = <0x24>;
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_touch>;
> >> + interrupt-parent = <&gpio1>;
> >> + interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> >> + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> >> + vdd-supply = <®_touch>;
> >> + touchscreen-size-x = <880>;
> >> + touchscreen-size-y = <1280>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + button@0 {
> >> + reg = <0>;
> >> + linux,keycodes = <KEY_HOMEPAGE>;
> >> + };
> >> +
> >> + button@1 {
> >> + reg = <1>;
> >> + linux,keycodes = <KEY_MENU>;
> >> + };
> >> +
> >> + button@2 {
> >> + reg = <2>;
> >> + linux,keycodes = <KEY_BACK>;
> >> + };
> >> +
> >> + button@3 {
> >> + reg = <3>;
> >> + linux,keycodes = <KEY_SEARCH>;
> >> + };
> >> +
> >> + button@4 {
> >> + reg = <4>;
> >> + linux,keycodes = <KEY_VOLUMEDOWN>;
> >> + };
> >> +
> >> + button@5 {
> >> + reg = <5>;
> >> + linux,keycodes = <KEY_VOLUMEUP>;
> >> + };
> >> +
> >> + button@6 {
> >> + reg = <6>;
> >> + linux,keycodes = <KEY_CAMERA>;
> >> + };
> >> +
> >> + button@7 {
> >> + reg = <7>;
> >> + linux,keycodes = <KEY_POWER>;
> >> + };
> >> + };
> >> +};
> >> +
> >> &i2c4 {
> >> clock-frequency = <100000>;
> >> pinctrl-names = "default", "sleep";
> >> @@ -232,6 +307,15 @@ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
> >> >;
> >> };
> >>
> >> + pinctrl_touch: touchgrp {
> >> + fsl,pins = <
> >> + /* CYTTSP interrupt */
> >> + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
> >> + /* CYTTSP reset */
> >> + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
> >> + >;
> >> + };
> >> +
> >> pinctrl_i2c1: i2c1grp {
> >> fsl,pins = <
> >> MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
> >> @@ -239,6 +323,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
> >> >;
> >> };
> >>
> >> + pinctrl_i2c3: i2c3grp {
> >> + fsl,pins = <
> >> + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
> >> + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
> >> + >;
> >> + };
> >> +
> >> pinctrl_i2c4: i2c4grp {
> >> fsl,pins = <
> >> MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
> >> @@ -246,6 +337,13 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
> >> >;
> >> };
> >>
> >> + pinctrl_touch_reg: touchreggrp {
> >> + fsl,pins = <
> >> + /* TOUCH_PWR_EN */
> >> + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
> >> + >;
> >> + };
> >> +
> >> pinctrl_uart1: uart1grp {
> >> fsl,pins = <
> >> MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> >> --
> >> 2.38.1
> >>
> >>
> >>
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>