Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names

[Dmitry Baryshkov]

On Sun, 8 Jan 2023 at 20:04, Robert Marko <robimarko@xxxxxxxxx> wrote:
>
> On Sun, 8 Jan 2023 at 18:32, Dmitry Baryshkov
> <dmitry.baryshkov@xxxxxxxxxx> wrote:
> >
> > On Sun, 8 Jan 2023 at 15:04, Robert Marko <robimarko@xxxxxxxxx> wrote:
> > >
> > > It seems that clock-output-names for the USB3 QMP PHY-s where set without
> > > actually checking what is the GCC clock driver expecting, so clock core
> > > could never actually find the parents for usb0_pipe_clk_src and
> > > usb1_pipe_clk_src clocks in the GCC driver.
> > >
> > > So, correct the names to be what the driver expects so that parenting
> > > works.
> > >
> > > Before:
> > > gcc_usb0_pipe_clk_src                0        0        0   125000000          0     0  50000         Y
> > > gcc_usb1_pipe_clk_src                0        0        0   125000000          0     0  50000         Y
> > >
> > > After:
> > >  usb3phy_0_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
> > >     usb0_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
> > >        gcc_usb0_pipe_clk              1        1        0   125000000          0     0  50000         Y
> > >  usb3phy_1_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
> > >     usb1_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
> > >        gcc_usb1_pipe_clk              1        1        0   125000000          0     0  50000         Y
> > >
> > > Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
> > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >
> > Nevertheless, could you please add .fw_name to these entries in gcc
> > driver (as you did for other clocks in 35dc8e101a8e ("clk: qcom:
> > ipq8074: populate fw_name for all parents")) and add all pipe clocks
> > to the gcc node? This way you can drop clock-output-names from the PHY
> > nodes.
>
> As you noticed they are in the GCC patch already, after the PCI PIPE
> parenting fixes
> are merged I plan to add them to the GCC node to avoid global lookup.

Good! I think the pcie fixes are already in Bjorn's tree. And you
might send the dts fix anyway, in the worst case the driver will just
ignore the DT clocks.


-- 
With best wishes
Dmitry