Re: [PATCH v2 3/7] mm/vmalloc.c: allow vread() to read out vm_map_ram areas

[Baoquan He]

On 01/09/23 at 07:12am, Lorenzo Stoakes wrote:
> On Mon, Jan 09, 2023 at 12:35:04PM +0800, Baoquan He wrote:
> > Sorry for late reply, just come back from vacation.
> 
> Hope you had a great time! :)

Thanks.

> 
> >
> > Lei + mutt sounds like a good idea. I relied too much on mbsync in the
> > past.
> >
> 
> Yeah I'm finding it works well,
> https://josefbacik.github.io/kernel/2021/10/18/lei-and-b4.html is a handy guide!

Very helpful, will try.

> 
> [snip]
> > > Maybe let me rephrase:-
> > >
> > > - We want to read `count` bytes from `addr` into `buf`
> > > - We iterate over _used_ blocks, placing the start/end of each block in `rs`, `re`
> > >   respectively.
> > > - If we hit a block whose start address is above the one in which we are interested then:-
> > >   - Place a zero byte in the buffer
> > >   - Increment `addr` by 1 byte
> > >   - Decrement the `count` by 1 byte
> > >   - Carry on
> > >
> > > I am seriously confused as to why we do this? Surely we should be checking
> > > whether the range [addr, addr + count) overlaps this block at all, and only then
> > > copying the relevant region?
> >
> > I guessed this could be your concern, but not very sure. That
> > code block is copied from vread(), and my considerations are:
> > 1) We could starting read from any position of kcore file. /proc/kcore
> > is a elf file logically, it's allowed to read from anywhere, right? We
> > don't have to read the entire file always. So the vmap_block reading is
> > not necessarily page aligned. It's very similar with the empty area
> > filling in vread().
> > 2) memset() is doing the byte by byte reading. We can
> > change code as below. While we don't save the effort very much, and we
> > need introduce an extra local variable to store the value of
> > (start - end).
> >
> > diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> > index b054081aa66b..dce4a843a9e8 100644
> > --- a/mm/vmalloc.c
> > +++ b/mm/vmalloc.c
> > @@ -3576,6 +3576,15 @@ static void vmap_ram_vread(char *buf, char *addr, int count, unsigned long flags
> > +		if (addr < start) {
> > +			int num = min(count, (start - add));
> > +			memset(buf, 0, count);
> > +			count -= num;
> > +			if (count == 0)
> > +				break;
> > +			buf -= num;
> > +			addr -= num;
> > +		}
> >  		/*it could start reading from the middle of used region*/
> >  		offset = offset_in_page(addr);
> >  		n = ((re - rs + 1) << PAGE_SHIFT) - offset;
> >
> 
> The difference with vread() is that uses a while loop rather than an if clause
> so operates over the whole region byte-by-byte, your original would only do this
> for 1 byte so now things make a lot more sense!

Oops, that 'if clause' is a code bug, I finally got your point until
now, my dumb head.

> 
> This approach makes sense though I'd put the count == 0 check first and nit
> 'add' should be 'addr'.
> 
> I am happy with either this or a while loop instead of an if which it seems is
> what the original issue was!

OK, I will think again which one is more appropriate.

> 
> > void *memset(void *s, int c, size_t count)
> > {
> >         char *xs = s;
> >
> >         while (count--)
> >                 *xs++ = c;
> >         return s;
> > }
> >
> > >
> > > It's the fact that blocks are at base page granularity but then this condition
> > > is at byte granularity that is confusing to me (again it's _very_ possible I am
> > > just being dumb here and missing something, just really want to understand this
> > > better :)
> >
> > I like this kind of reviewing with careful checking and deep thinking.
> > For above code block, I think it's a very great point. From my point of
> > view, I like the memset version better, it's easier to understand. If we
> > all agree, we can change it to take memset way. When I made patches,
> > several issues related to patches were hovering in my mind at the same
> > time, I did not consider this one so deeply.
> >
> 
> Thanks :) I have a particular interest in vmalloc so am happy to dive in with
> reviews here!
> 
> > >
> > > > > > -		vm = va->vm;
> > > > > > -		vaddr = (char *) vm->addr;
> > > > > > -		if (addr >= vaddr + get_vm_area_size(vm))
> > > > > > +		vaddr = (char *) va->va_start;
> > > > > > +		size = flags ? va_size(va) : get_vm_area_size(vm);
> > > > >
> > > > > For example here, I feel that this ternary should be reversed and based on
> > > > > whether vm is null, unles we expect vm to ever be non-null _and_ flags to be
> > > > > set?
> > > >
> > > > Now only vm_map_ram area sets flags, all other types has vm not null.
> > > > Since those temporary state, e.g vm==NULL, flags==0 case has been
> > > > filtered out. Is below you suggested?
> > > >
> > > > 		size = (!vm&&flags)? va_size(va) : get_vm_area_size(vm);
> > > > 		or
> > > > 		size = (vm&&!flags)? get_vm_area_size(vm):va_size(va);
> > > >
> > >
> > > Sorry I didn't phrase this very well, my point is that the key thing you're
> > > relying on here is whether vm exists in order to use it so I simply meant:-
> > >
> > > size = vm ? get_vm_area_size(vm) : va_size(va);
> > >
> > > This just makes it really explicit that you need vm to be non-NULL, and you've
> > > already done the flags check before so this should suffice.
> >
> > Sounds reasonable, I will copy above line you pasted. Thanks a lot.

Thanks again for careful reviewing and great suggestions and findings.