Re: [PATCH v10 4/9] dt-bindings: display: bridge: anx7625: Add mode-switch support

[Pin-yen Lin]

Hi Dmitry,

Thanks for the review.

On Thu, Jan 12, 2023 at 12:43 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On 12/01/2023 06:20, Pin-yen Lin wrote:
> > Analogix 7625 can be used in systems to switch the DP traffic between
> > two downstreams, which can be USB Type-C DisplayPort alternate mode
> > lane or regular DisplayPort output ports.
> >
> > Update the binding to accommodate this usage by introducing a
> > data-lanes and a mode-switch property on endpoints.
> >
> > Also include the link to the product brief in the bindings.
> >
> > Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> > Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> > Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> >
> > ---
> >
> > Changes in v10:
> > - Collected Reviewed-by and Tested-by tags
> >
> > Changes in v9:
> > - Collected Reviewed-by tag
> >
> > Changes in v8:
> > - Updated anx7625 bindings for data-lane property
> > - Fixed the subject prefix
> >
> > Changes in v7:
> > - Fixed issues reported by dt_binding_check
> > - Updated the schema and the example dts for data-lanes.
> > - Changed to generic naming for the example dts node.
> >
> > Changes in v6:
> > - Remove switches node and use endpoints and data-lanes property to
> >    describe the connections.
> >
> >   .../display/bridge/analogix,anx7625.yaml      | 99 ++++++++++++++++++-
> >   1 file changed, 96 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > index 4590186c4a0b..b49a350c40e3 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > @@ -12,7 +12,8 @@ maintainers:
> >
> >   description: |
> >     The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> > -  designed for portable devices.
> > +  designed for portable devices. Product brief is available at
> > +  https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf
> >
> >   properties:
> >     compatible:
> > @@ -112,10 +113,48 @@ properties:
> >                 data-lanes: true
> >
> >         port@1:
> > -        $ref: /schemas/graph.yaml#/properties/port
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> >           description:
> >             Video port for panel or connector.
> >
> > +        patternProperties:
> > +          "^endpoint@[01]$":
> > +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              reg:
> > +                maxItems: 1
>
> Please remove duplicates to the graph.yaml. You have several of them here.

I'll fix this in v11.
>
> > +
> > +              remote-endpoint: true
> > +
> > +              data-lanes:
> > +                oneOf:
> > +                  - items:
> > +                      - enum: [0, 1, 2, 3]
> > +
> > +                  - items:
> > +                      - const: 0
> > +                      - const: 1
> > +
> > +                  - items:
> > +                      - const: 2
> > +                      - const: 3
> > +
> > +                  - items:
> > +                      - const: 0
> > +                      - const: 1
> > +                      - const: 2
> > +                      - const: 3
> > +
> > +              mode-switch:
> > +                type: boolean
> > +                description: Register this node as a Type-C mode switch or not.
> > +
> > +            required:
> > +              - reg
> > +              - remote-endpoint
> > +
> >       required:
> >         - port@0
> >         - port@1
> > @@ -164,8 +203,12 @@ examples:
> >                   };
> >
> >                   mipi2dp_bridge_out: port@1 {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> >                       reg = <1>;
> > -                    anx7625_out: endpoint {
> > +                    anx7625_out: endpoint@0 {
>
> But why? It's perfectly fine from the graph perspective to omit the
> index if there is jus a single endpoint.

This is because "reg" property is added as a required property. Do you
suggest making "reg" property optional and only add it when there are
multiple ports?
>
> > +                        reg = <0>;
> >                           remote-endpoint = <&panel_in>;
> >                       };
> >                   };
> > @@ -186,3 +229,53 @@ examples:
> >               };
> >           };
> >       };
> > +  - |
> > +    i2c3 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        encoder@58 {
> > +            compatible = "analogix,anx7625";
> > +            reg = <0x58>;
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&anx7625_dp_pins>;
> > +            enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>;
> > +            reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
> > +            vdd10-supply = <&pp1100_dpbrdg>;
> > +            vdd18-supply = <&pp1800_dpbrdg_dx>;
> > +            vdd33-supply = <&pp3300_dpbrdg_dx>;
> > +            analogix,audio-enable;
> > +
> > +            ports {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                port@0 {
> > +                    reg = <0>;
> > +                    anx7625_dp_in: endpoint {
> > +                        bus-type = <7>;
> > +                        remote-endpoint = <&dpi_out>;
> > +                    };
> > +                };
> > +
> > +                port@1 {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    reg = <1>;
> > +                    anx_typec0: endpoint@0 {
> > +                        reg = <0>;
> > +                        mode-switch;
> > +                        data-lanes = <0 1>;
> > +                        remote-endpoint = <&typec_port0>;
> > +                    };
> > +                    anx_typec1: endpoint@1 {
> > +                        reg = <1>;
> > +                        mode-switch;
> > +                        data-lanes = <2 3>;
> > +                        remote-endpoint = <&typec_port1>;
> > +                    };
> > +                };
> > +            };
> > +        };
> > +    };
>
> --
> With best wishes
> Dmitry
>

Best regards,
Pin-yen