Re: [PATCH v10 4/9] dt-bindings: display: bridge: anx7625: Add mode-switch support

[Rob Herring]

On Wed, Jan 11, 2023 at 10:21 PM Pin-yen Lin <treapking@xxxxxxxxxxxx> wrote:
>
> Analogix 7625 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
>
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
>
> Also include the link to the product brief in the bindings.
>
> Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
>
> ---
>
> Changes in v10:
> - Collected Reviewed-by and Tested-by tags
>
> Changes in v9:
> - Collected Reviewed-by tag
>
> Changes in v8:
> - Updated anx7625 bindings for data-lane property
> - Fixed the subject prefix
>
> Changes in v7:
> - Fixed issues reported by dt_binding_check
> - Updated the schema and the example dts for data-lanes.
> - Changed to generic naming for the example dts node.
>
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>   describe the connections.
>
>  .../display/bridge/analogix,anx7625.yaml      | 99 ++++++++++++++++++-
>  1 file changed, 96 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 4590186c4a0b..b49a350c40e3 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -12,7 +12,8 @@ maintainers:
>
>  description: |
>    The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> -  designed for portable devices.
> +  designed for portable devices. Product brief is available at
> +  https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf
>
>  properties:
>    compatible:
> @@ -112,10 +113,48 @@ properties:
>                data-lanes: true
>
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: /schemas/graph.yaml#/$defs/port-base
>          description:
>            Video port for panel or connector.
>
> +        patternProperties:
> +          "^endpoint@[01]$":
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base

You are using a property from video-interfaces.yaml, so you need to
reference that.

Needs some description of what each endpoint is. IOW, how each
endpoint corresponds to the h/w.

> +            unevaluatedProperties: false
> +
> +            properties:
> +              reg:
> +                maxItems: 1
> +
> +              remote-endpoint: true
> +
> +              data-lanes:
> +                oneOf:
> +                  - items:
> +                      - enum: [0, 1, 2, 3]
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +
> +                  - items:
> +                      - const: 2
> +                      - const: 3
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +                      - const: 2
> +                      - const: 3
> +
> +              mode-switch:
> +                type: boolean
> +                description: Register this node as a Type-C mode switch or not.
> +
> +            required:
> +              - reg
> +              - remote-endpoint
> +
>      required:
>        - port@0
>        - port@1
> @@ -164,8 +203,12 @@ examples:
>                  };
>
>                  mipi2dp_bridge_out: port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
>                      reg = <1>;
> -                    anx7625_out: endpoint {
> +                    anx7625_out: endpoint@0 {
> +                        reg = <0>;
>                          remote-endpoint = <&panel_in>;
>                      };
>                  };
> @@ -186,3 +229,53 @@ examples:
>              };
>          };
>      };
> +  - |
> +    i2c3 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        encoder@58 {
> +            compatible = "analogix,anx7625";
> +            reg = <0x58>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&anx7625_dp_pins>;
> +            enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
> +            vdd10-supply = <&pp1100_dpbrdg>;
> +            vdd18-supply = <&pp1800_dpbrdg_dx>;
> +            vdd33-supply = <&pp3300_dpbrdg_dx>;
> +            analogix,audio-enable;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    anx7625_dp_in: endpoint {
> +                        bus-type = <7>;
> +                        remote-endpoint = <&dpi_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    reg = <1>;
> +                    anx_typec0: endpoint@0 {
> +                        reg = <0>;
> +                        mode-switch;
> +                        data-lanes = <0 1>;
> +                        remote-endpoint = <&typec_port0>;
> +                    };
> +                    anx_typec1: endpoint@1 {
> +                        reg = <1>;
> +                        mode-switch;
> +                        data-lanes = <2 3>;
> +                        remote-endpoint = <&typec_port1>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> --
> 2.39.0.314.g84b9a713c41-goog
>