[PATCH v6 10/11] mfd: intel-m10-bmc: Add PMCI driver

From: Ilpo Järvinen
Date: Mon Jan 16 2023 - 05:13:21 EST

Next message: Ilpo Järvinen: "[PATCH v6 08/11] fpga: m10bmc-sec: Create helpers for rsu status/progress checks"
Previous message: Ilpo Järvinen: "[PATCH v6 11/11] fpga: m10bmc-sec: Add support for N6000"
In reply to: Ilpo Järvinen: "[PATCH v6 11/11] fpga: m10bmc-sec: Add support for N6000"
Next in thread: Ilpo Järvinen: "[PATCH v6 08/11] fpga: m10bmc-sec: Create helpers for rsu status/progress checks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.

PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. The access
to the register is done indirectly via a hardware controller/bridge
that handles read/write/clear commands and acknowledgments for the
commands.

Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.

Co-developed-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
Signed-off-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
Co-developed-by: Russ Weight <russell.h.weight@xxxxxxxxx>
Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
Co-developed-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
Reviewed-by: Xu Yilun <yilun.xu@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-m10-bmc-pmci.c | 219 ++++++++++++++++++
include/linux/mfd/intel-m10-bmc.h | 28 +++
5 files changed, 264 insertions(+), 4 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index 9773925138af..a8ab58035c95 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -1,4 +1,4 @@
-What: /sys/bus/spi/devices/.../bmc_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@xxxxxxxxx>
@@ -6,7 +6,7 @@ Description: Read only. Returns the hardware build version of Intel
MAX10 BMC chip.
Format: "0x%x".

-What: /sys/bus/spi/devices/.../bmcfw_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@xxxxxxxxx>
@@ -14,7 +14,7 @@ Description: Read only. Returns the firmware version of Intel MAX10
BMC chip.
Format: "0x%x".

-What: /sys/bus/spi/devices/.../mac_address
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_address
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
@@ -25,7 +25,7 @@ Description: Read only. Returns the first MAC address in a block
space.
Format: "%02x:%02x:%02x:%02x:%02x:%02x".

-What: /sys/bus/spi/devices/.../mac_count
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_count
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a09d4ac60dc7..82f13614d98a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2238,6 +2238,18 @@ config MFD_INTEL_M10_BMC_SPI
additional drivers must be enabled in order to use the functionality
of the device.

+config MFD_INTEL_M10_BMC_PMCI
+ tristate "Intel MAX 10 Board Management Controller with PMCI"
+ depends on FPGA_DFL
+ select MFD_INTEL_M10_BMC_CORE
+ select REGMAP
+ help
+ Support for the Intel MAX 10 board management controller via PMCI.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_RSMU_I2C
tristate "Renesas Synchronization Management Unit with I2C"
depends on I2C && OF
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5d1f308ee2a7..c90fb96cad2a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -274,6 +274,7 @@ obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o

obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc-core.o
obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o

obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/intel-m10-bmc-pmci.c b/drivers/mfd/intel-m10-bmc-pmci.c
new file mode 100644
index 000000000000..975019f644b5
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-pmci.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MAX10 BMC Platform Management Component Interface (PMCI) based
+ * interface.
+ *
+ * Copyright (C) 2020-2023 Intel Corporation.
+ */
+
+#include <linux/device.h>
+#include <linux/dfl.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+struct m10bmc_pmci_device {
+ void __iomem *base;
+ struct intel_m10bmc m10bmc;
+};
+
+/*
+ * Intel FGPA indirect register access via hardware controller/bridge.
+ */
+#define INDIRECT_CMD_OFF 0
+#define INDIRECT_CMD_CLR 0
+#define INDIRECT_CMD_RD BIT(0)
+#define INDIRECT_CMD_WR BIT(1)
+#define INDIRECT_CMD_ACK BIT(2)
+
+#define INDIRECT_ADDR_OFF 0x4
+#define INDIRECT_RD_OFF 0x8
+#define INDIRECT_WR_OFF 0xc
+
+#define INDIRECT_INT_US 1
+#define INDIRECT_TIMEOUT_US 10000
+
+struct indirect_ctx {
+ void __iomem *base;
+ struct device *dev;
+};
+
+static int indirect_clear_cmd(struct indirect_ctx *ctx)
+{
+ unsigned int cmd;
+ int ret;
+
+ writel(INDIRECT_CMD_CLR, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, cmd,
+ cmd == INDIRECT_CMD_CLR,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "timed out waiting clear cmd (residual cmd=0x%x)\n", cmd);
+
+ return ret;
+}
+
+static int indirect_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct indirect_ctx *ctx = context;
+ unsigned int cmd, ack, tmpval;
+ int ret, ret2;
+
+ cmd = readl(ctx->base + INDIRECT_CMD_OFF);
+ if (cmd != INDIRECT_CMD_CLR)
+ dev_warn(ctx->dev, "residual cmd 0x%x on read entry\n", cmd);
+
+ writel(reg, ctx->base + INDIRECT_ADDR_OFF);
+ writel(INDIRECT_CMD_RD, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
+ (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "read timed out on reg 0x%x ack 0x%x\n", reg, ack);
+ else
+ tmpval = readl(ctx->base + INDIRECT_RD_OFF);
+
+ ret2 = indirect_clear_cmd(ctx);
+
+ if (ret)
+ return ret;
+ if (ret2)
+ return ret2;
+
+ *val = tmpval;
+ return 0;
+}
+
+static int indirect_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct indirect_ctx *ctx = context;
+ unsigned int cmd, ack;
+ int ret, ret2;
+
+ cmd = readl(ctx->base + INDIRECT_CMD_OFF);
+ if (cmd != INDIRECT_CMD_CLR)
+ dev_warn(ctx->dev, "residual cmd 0x%x on write entry\n", cmd);
+
+ writel(val, ctx->base + INDIRECT_WR_OFF);
+ writel(reg, ctx->base + INDIRECT_ADDR_OFF);
+ writel(INDIRECT_CMD_WR, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
+ (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "write timed out on reg 0x%x ack 0x%x\n", reg, ack);
+
+ ret2 = indirect_clear_cmd(ctx);
+
+ if (ret)
+ return ret;
+ return ret2;
+}
+
+static const struct regmap_range m10bmc_pmci_regmap_range[] = {
+ regmap_reg_range(M10BMC_N6000_SYS_BASE, M10BMC_N6000_SYS_END),
+};
+
+static const struct regmap_access_table m10bmc_pmci_access_table = {
+ .yes_ranges = m10bmc_pmci_regmap_range,
+ .n_yes_ranges = ARRAY_SIZE(m10bmc_pmci_regmap_range),
+};
+
+static struct regmap_config m10bmc_pmci_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .wr_table = &m10bmc_pmci_access_table,
+ .rd_table = &m10bmc_pmci_access_table,
+ .reg_read = &indirect_reg_read,
+ .reg_write = &indirect_reg_write,
+ .max_register = M10BMC_N6000_SYS_END,
+};
+
+static struct mfd_cell m10bmc_pmci_n6000_bmc_subdevs[] = {
+ { .name = "n6000bmc-hwmon" },
+};
+
+static const struct m10bmc_csr_map m10bmc_n6000_csr_map = {
+ .base = M10BMC_N6000_SYS_BASE,
+ .build_version = M10BMC_N6000_BUILD_VER,
+ .fw_version = NIOS2_N6000_FW_VERSION,
+ .mac_low = M10BMC_N6000_MAC_LOW,
+ .mac_high = M10BMC_N6000_MAC_HIGH,
+ .doorbell = M10BMC_N6000_DOORBELL,
+ .auth_result = M10BMC_N6000_AUTH_RESULT,
+ .bmc_prog_addr = M10BMC_N6000_BMC_PROG_ADDR,
+ .bmc_reh_addr = M10BMC_N6000_BMC_REH_ADDR,
+ .bmc_magic = M10BMC_N6000_BMC_PROG_MAGIC,
+ .sr_prog_addr = M10BMC_N6000_SR_PROG_ADDR,
+ .sr_reh_addr = M10BMC_N6000_SR_REH_ADDR,
+ .sr_magic = M10BMC_N6000_SR_PROG_MAGIC,
+ .pr_prog_addr = M10BMC_N6000_PR_PROG_ADDR,
+ .pr_reh_addr = M10BMC_N6000_PR_REH_ADDR,
+ .pr_magic = M10BMC_N6000_PR_PROG_MAGIC,
+ .rsu_update_counter = M10BMC_N6000_STAGING_FLASH_COUNT,
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_pmci_n6000 = {
+ .cells = m10bmc_pmci_n6000_bmc_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_pmci_n6000_bmc_subdevs),
+ .csr_map = &m10bmc_n6000_csr_map,
+};
+
+static int m10bmc_pmci_probe(struct dfl_device *ddev)
+{
+ struct device *dev = &ddev->dev;
+ struct m10bmc_pmci_device *pmci;
+ struct indirect_ctx *ctx;
+
+ pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
+ if (!pmci)
+ return -ENOMEM;
+
+ pmci->m10bmc.dev = dev;
+
+ pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
+ if (IS_ERR(pmci->base))
+ return PTR_ERR(pmci->base);
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->base = pmci->base + M10BMC_N6000_INDIRECT_BASE;
+ ctx->dev = dev;
+ indirect_clear_cmd(ctx);
+ pmci->m10bmc.regmap = devm_regmap_init(dev, NULL, ctx, &m10bmc_pmci_regmap_config);
+
+ if (IS_ERR(pmci->m10bmc.regmap))
+ return PTR_ERR(pmci->m10bmc.regmap);
+
+ return m10bmc_dev_init(&pmci->m10bmc, &m10bmc_pmci_n6000);
+}
+
+#define FME_FEATURE_ID_M10BMC_PMCI 0x12
+
+static const struct dfl_device_id m10bmc_pmci_ids[] = {
+ { FME_ID, FME_FEATURE_ID_M10BMC_PMCI },
+ { }
+};
+MODULE_DEVICE_TABLE(dfl, m10bmc_pmci_ids);
+
+static struct dfl_driver m10bmc_pmci_driver = {
+ .drv = {
+ .name = "intel-m10-bmc",
+ .dev_groups = m10bmc_dev_groups,
+ },
+ .id_table = m10bmc_pmci_ids,
+ .probe = m10bmc_pmci_probe,
+};
+
+module_dfl_driver(m10bmc_pmci_driver);
+
+MODULE_DESCRIPTION("MAX10 BMC PMCI-based interface");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 1f75b33240ad..810534b1bd12 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -120,6 +120,34 @@
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define M10BMC_N3000_STAGING_FLASH_COUNT 0x17ffb000

+#define M10BMC_N6000_INDIRECT_BASE 0x400
+
+#define M10BMC_N6000_SYS_BASE 0x0
+#define M10BMC_N6000_SYS_END 0xfff
+
+#define M10BMC_N6000_DOORBELL 0x1c0
+#define M10BMC_N6000_AUTH_RESULT 0x1c4
+
+#define M10BMC_N6000_BUILD_VER 0x0
+#define NIOS2_N6000_FW_VERSION 0x4
+#define M10BMC_N6000_MAC_LOW 0x20
+#define M10BMC_N6000_MAC_HIGH (M10BMC_N6000_MAC_LOW + 4)
+
+/* Addresses for security related data in FLASH */
+#define M10BMC_N6000_BMC_REH_ADDR 0x7ffc004
+#define M10BMC_N6000_BMC_PROG_ADDR 0x7ffc000
+#define M10BMC_N6000_BMC_PROG_MAGIC 0x5746
+
+#define M10BMC_N6000_SR_REH_ADDR 0x7ffd004
+#define M10BMC_N6000_SR_PROG_ADDR 0x7ffd000
+#define M10BMC_N6000_SR_PROG_MAGIC 0x5253
+
+#define M10BMC_N6000_PR_REH_ADDR 0x7ffe004
+#define M10BMC_N6000_PR_PROG_ADDR 0x7ffe000
+#define M10BMC_N6000_PR_PROG_MAGIC 0x5250
+
+#define M10BMC_N6000_STAGING_FLASH_COUNT 0x7ff5000
+
/**
* struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
*/
--
2.30.2

Next message: Ilpo Järvinen: "[PATCH v6 08/11] fpga: m10bmc-sec: Create helpers for rsu status/progress checks"
Previous message: Ilpo Järvinen: "[PATCH v6 11/11] fpga: m10bmc-sec: Add support for N6000"
In reply to: Ilpo Järvinen: "[PATCH v6 11/11] fpga: m10bmc-sec: Add support for N6000"
Next in thread: Ilpo Järvinen: "[PATCH v6 08/11] fpga: m10bmc-sec: Create helpers for rsu status/progress checks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]