RE: [PATCH] mmc: block: workaround long ioctl busy timeout

[Avri Altman]

> 
> The ioctl interface allowed to set cmd_timeout_ms when polling for busy on
> R1B commands. This was often limited by the max hw timeout so work around
> it like for the sanitize command.
> 
> Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/core/block.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index
> 20da7ed43e6d..ba3bc9014179 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -472,6 +472,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card
> *card, struct mmc_blk_data *md,
>         struct scatterlist sg;
>         int err;
>         unsigned int target_part;
> +       unsigned int busy_timeout = MMC_BLK_TIMEOUT_MS;
> +       int poll_prog = false;
> 
>         if (!card || !md || !idata)
>                 return -EINVAL;
> @@ -493,6 +495,12 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card
> *card, struct mmc_blk_data *md,
>         cmd.opcode = idata->ic.opcode;
>         cmd.arg = idata->ic.arg;
>         cmd.flags = idata->ic.flags;
> +       /* R1B flag might be removed here to work around hw, so save it */
> +       poll_prog = (idata->rpmb || (cmd.flags & MMC_RSP_R1B) ==
> MMC_RSP_R1B);
> +       busy_timeout = idata->ic.cmd_timeout_ms ? :
> +               MMC_BLK_TIMEOUT_MS;
Isn't commit 23e09be254f9 already introduced the very same thing?
Meaning mmc_poll_for_busy() is already called with the appropriate timeout?

Thanks,
Avri

> +       if (poll_prog)
> +               mmc_prepare_busy_cmd(card->host, &cmd, busy_timeout);
> 
>         if (idata->buf_bytes) {
>                 data.sg = &sg;
> @@ -596,7 +604,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card
> *card, struct mmc_blk_data *md,
>         if (idata->ic.postsleep_min_us)
>                 usleep_range(idata->ic.postsleep_min_us, idata-
> >ic.postsleep_max_us);
> 
> -       if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
> +       if (poll_prog) {
>                 /*
>                  * Ensure RPMB/R1B command has completed by polling CMD13
> "Send Status". Here we
>                  * allow to override the default timeout value if a custom timeout is
> specified.
> --
> 2.37.3
> 
> 
> Hyperstone GmbH | Reichenaustr. 39a  | 78467 Konstanz Managing Director:
> Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782