[net-next: PATCH v4 0/8] DSA: switch to fwnode_/device_
From: Marcin Wojtas
Date: Mon Jan 16 2023 - 12:53:11 EST
Hi,
After a longer while this is a re-spin of the DSA migration
to fwnode_/device_ API.
It addresses all comments from the previous iteration - the
details are summarized in the changelog section below.
For reference, here is the discussion under v3.
https://lore.kernel.org/netdev/20220727064321.2953971-1-mw@xxxxxxxxxxxx/t/
The ultimate goal of these changes is to prepare the DSA to use ACPI in
future, which works locally on my branches [1][2], however, this part
needs to be handled separately on the lists, as discussed in v1.
The patchset is based and tested on top of
pure net-next/main branch. Each commit was checked on:
* On EspressoBIN
* On SolidRun CN913x CEx7 Eval Board
Any comments or remarks will be appreciated.
Best regards,
Marcin
[1] https://github.com/semihalf-wojtas-marcin/Linux-Kernel/commits/dsa-acpi-dev
[2] https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/dsa-acpi-v2
Changelog v3 -> v4:
1/8:
* Improve commit message.
2/8:
* Improve handling the old 'fixed-link' binding in
fwnode_phy_is_fixed_link()
* Stop shadowing the real error codes in fwnode_phy_register_fixed_link()
3/8
* Make "label" property optional again
* Fix mt7530 compile error reported by kernel test robot <lkp@xxxxxxxxx>
* Simplify code update in mv88e6xxx
4/8
* Improve commit message
5/8
* Improve commit message
7/8
* Update dev_dbg message
8/8
* Move fwnode declaration
* Simplify obtaining match_data
Changelog v2 -> v3:
1/8:
* Replace forward declaration s/device_node/fwnode_handle/ in
include/linux/phy_fixed.h
* Add Florian's RB
* 3/8:
* Extend lines width in the commit message.
* While dropping dp->dn fields in the drivers, switch to
fwnode_ API in the updated places.
* 5/8:
* Update routine name to fwnode_find_parent_dev_match()
* Improve comment section
* Move the definition adjacent to a group of fwnode
APIs operating on parents
Changelog v1 -> v2:
1/8
* Drop unnecessary check in fixed_phy_get_gpiod()
* Improve line breaking
* Use device_set_node & dev_fwnode
2/8
* Switch to fwnode_property_count_u32 and fix comparison
in if statement.
3/8
* Drop dn usage entirely and use dp->fwnode only. Update
all dependent drivers to use to_of_node.
* Use device_set_node, dev_fwnode & device_get_named_child_node
* Replace '_of' routines suffix with '_fw'
4/8
* Use device_set_node
5/8
* New patch
6/8
* Use device_match_fwnode
* Restore EXPORT_SYMBOL()
7/8
* Get rid of of_mdiobus_register_device
8/8
* Use dev_fwnode in mv88e6xxx_probe
* Simplify condition checks in mv88e6xxx_probe as suggested by Andy
Marcin Wojtas (8):
net: phy: fixed_phy: switch to fwnode_ API
net: mdio: switch fixed-link PHYs API to fwnode_
net: dsa: switch to device_/fwnode_ APIs
net: mvpp2: initialize port fwnode pointer
device property: introduce fwnode_find_parent_dev_match
net: core: switch to fwnode_find_net_device_by_node()
net: mdio: introduce fwnode_mdiobus_register_device()
net: dsa: mv88e6xxx: switch to device_/fwnode_ APIs
include/linux/etherdevice.h | 1 +
include/linux/fwnode_mdio.h | 22 ++++
include/linux/of_net.h | 6 -
include/linux/phy_fixed.h | 6 +-
include/linux/property.h | 1 +
include/net/dsa.h | 2 +-
net/dsa/port.h | 4 +-
drivers/base/property.c | 23 ++++
drivers/net/dsa/mt7530.c | 6 +-
drivers/net/dsa/mv88e6xxx/chip.c | 57 ++++-----
drivers/net/dsa/qca/qca8k-8xxx.c | 2 +-
drivers/net/dsa/realtek/rtl8365mb.c | 2 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
drivers/net/mdio/fwnode_mdio.c | 125 ++++++++++++++++++++
drivers/net/mdio/of_mdio.c | 112 +-----------------
drivers/net/phy/fixed_phy.c | 39 +++---
net/core/net-sysfs.c | 25 ++--
net/dsa/dsa.c | 118 +++++++++---------
net/dsa/port.c | 85 +++++++------
net/dsa/slave.c | 7 +-
20 files changed, 341 insertions(+), 304 deletions(-)
--
2.29.0