Re: [PATCH net-next 5/5] arm64: dts: ti: k3-am625-sk: Add cpsw3g cpts PPS support

[Roger Quadros]

On 17/01/2023 07:28, Siddharth Vadapalli wrote:
> Vignesh,
> 
> On 16/01/23 22:00, Vignesh Raghavendra wrote:
>>
>>
>> On 16/01/23 9:35 pm, Roger Quadros wrote:
>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>>>> index 4f179b146cab..962a922cc94b 100644
>>>>>> --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>>>>>> @@ -366,6 +366,10 @@ &cpsw3g {
>>>>>>  	pinctrl-names = "default";
>>>>>>  	pinctrl-0 = <&main_rgmii1_pins_default
>>>>>>  		     &main_rgmii2_pins_default>;
>>>>>> +
>>>>>> +	cpts@3d000 {
>>>>>> +		ti,pps = <2 1>;
>>>>>> +	};
>>>>>>  };
>>>>>>  
>>>>>>  &cpsw_port1 {
>>>>>> @@ -464,3 +468,19 @@ partition@3fc0000 {
>>>>>>  		};
>>>>>>  	};
>>>>>>  };
>>>>>> +
>>>>>> +#define TS_OFFSET(pa, val)	(0x4+(pa)*4) (0x10000 | val)
>>>>> Should this go in ./include/dt-bindings/pinctrl/k3.h ?
>>>>> That way every board DT file doesn't have to define it.
>>>>>
>>>>> The name should be made more platform specific.
>>>>> e.g. K3_TS_OFFSET if it is the same for all K3 platforms.
>>>>> If not then please add Platform name instead of K3.
>>>> The offsets are board specific. If it is acceptable, I will add board specific
>>>> macro for the TS_OFFSET definition in the ./include/dt-bindings/pinctrl/k3.h
>>>> file. Please let me know.
>>> If it is board specific then it should remain in the board file.
>>
>>
>> The values you pass to macro maybe board specific. But the macro
>> definition itself same for a given SoC right? Also, is its same across
>> K3 family ?
>>

I misunderstood then. I agree with Vignesh.

>> Please use SoC specific prefix like AM62X_TS_OFFSET() or K3_TS_OFFSET()
>> accordingly.
> 
> For certain SoCs including AM62X, the macro is:
> #define TS_OFFSET(pa, val)	(0x4+(pa)*4) (0x10000 | val)
> while for other SoCs (refer [0]), the macro is:
> #define TS_OFFSET(pa, val)	(0x4+(pa)*4) (0x80000000 | val)
> 
> Therefore, I will use SoC specific prefix in the macro. Please let me know if
> the SoC specific macro can be added to the ./include/dt-bindings/pinctrl/k3.h
> file for each SoC. If not, I will add the SoC specific macro in the board file
> itself.

Not in board file please. It should go in ./include/dt-bindings/pinctrl/k3.h

> 
> [0] https://lwn.net/Articles/819313/
> 
> Regards,
> Siddharth.

cheers,
-roger