Re: [PATCH v1 2/3] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

[Neil Armstrong]

On 17/01/2023 13:02, rfoss@xxxxxxxxxx wrote:
> From: Robert Foss <robert.foss@xxxxxxxxxx>
>
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
>
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 26a608144886..7878f42e9378 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -221,10 +221,32 @@ &cdsp {
>   	firmware-name = "qcom/sm8350/cdsp.mbn";
>   };
>   
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&mdss_dsi0 {
> +	vdda-supply = <&vreg_l6b_1p2>;
> +	status = "okay";
> +};
> +
> +&mdss_dsi0_phy  {
> +	vdds-supply = <&vreg_l5b_0p88>;
> +	status = "okay";
> +};
> +
>   &gpi_dma1 {
>   	status = "okay";
>   };
>   
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
>   &mpss {
>   	status = "okay";
>   	firmware-name = "qcom/sm8350/modem.mbn";

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>