Re: [PATCH net-next v1 1/3] dt-bindings: net: Add Motorcomm yt8xxx ethernet phy Driver bindings

[Andrew Lunn]

> Hi Andrew, i'm an engineer from StarFive Technology Co.
> 
> This configuration is mainly to adapt to VF2 with JH7110 SoC.
> This is a defect in the design of JH7110. Only the basic delay 
> configuration of PHY can't meet the delay needs of JH7110,
> must with the configuration of tx-clk-x-inverted together can
> gmac work normally. Otherwise, gmac cannot work normally at 
> different rates. JH7110 has been taped and cannot be modified 
> in design, so it can only be corrected on software.

So you have a choice of one PHY, since i don't know of any other PHY
with this capability. I hope this is well documented, since PHYs tend
to be considered interchangeable, use whatever is currently the
cheapest. And i assume you will fix the MAC for the next version of
the silicon?

So all these clock invert properties are fine.

I will take another look at the delay property..

  Andrew