Re: [PATCH v6 RESEND] HID: multitouch: Add quirks for flipped axes

[Jiri Kosina]

On Tue, 10 Jan 2023, Allen Ballway wrote:

> Certain touchscreen devices, such as the ELAN9034, are oriented
> incorrectly and report touches on opposite points on the X and Y axes.
> For example, a 100x200 screen touched at (10,20) would report (90, 180)
> and vice versa.
> 
> This is fixed by adding device quirks to transform the touch points
> into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.
> 
> Signed-off-by: Allen Ballway <ballway@xxxxxxxxxxxx>
> ---
> V5 -> V6: Add another IS_ENABLED check for CONFIG_I2C_DMI_CORE because
> the module may not be there at all.
> 
> V4 -> V5: Add IS_ENABLED check for CONFIG_DMI to prevent linker error.
> 
> V3 -> V4: Move quirk logic to i2c_hid_get_dmi_quirks and remove
> duplicate quirks from hid-multitouch.
> 
> V2 -> V3: Use existing HID_QUIRK_*_INVERT and match the quirk in
> hid-quirk, passing down to hid-multitouch through the hid device.
> 
> V1 -> V2: Address review comments, change to use DMI match. Confirmed
> MT_TOOL_X/Y require transformation and update orientation based on
> flipped axes.

Appplied, thank you.

-- 
Jiri Kosina
SUSE Labs