[PATCH 3/3] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support

[Fabrizio Castro]

The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.

Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
---
 .../boot/dts/renesas/r9a09g011-v2mevk2.dts    | 122 ++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index d6737395df67..75ded4680dba 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
 
 / {
@@ -35,6 +36,36 @@ memory@180000000 {
 		device_type = "memory";
 		reg = <0x1 0x80000000 0x0 0x80000000>;
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
 };
 
 &avb {
@@ -50,6 +81,22 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
@@ -78,6 +125,68 @@ i2c2_pins: i2c2 {
 		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
 			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
 	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		sd0_cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		sd0_cd_uhs {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
+
+	emmc_pins: emmc {
+		emmc_pins_data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		emmc_pins_ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
 };
 
 &pwc {
@@ -85,6 +194,19 @@ &pwc {
 	status = "okay";
 };
 
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.34.1