[PATCH 5/5] dt-bindings: iio: cleanup examples - indentation

From: Krzysztof Kozlowski
Date: Wed Jan 18 2023 - 13:45:26 EST

Use 4-space indentation (for cases when it is neither 4 not 2 space).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/iio/accel/adi,adxl355.yaml | 52 +++----
.../bindings/iio/accel/adi,adxl372.yaml | 48 +++---
.../bindings/iio/adc/adi,ad7091r5.yaml | 8 +-
.../bindings/iio/adc/adi,ad7192.yaml | 2 +-
.../bindings/iio/adc/adi,ad7606.yaml | 38 ++---
.../bindings/iio/adc/adi,ad799x.yaml | 18 +--
.../bindings/iio/adc/adi,ad9467.yaml | 8 +-
.../bindings/iio/adc/adi,axi-adc.yaml | 10 +-
.../bindings/iio/adc/ingenic,adc.yaml | 14 +-
.../bindings/iio/adc/maxim,max1027.yaml | 4 +-
.../bindings/iio/adc/maxim,max1241.yaml | 4 +-
.../bindings/iio/adc/qcom,pm8018-adc.yaml | 2 +-
.../bindings/iio/adc/qcom,spmi-rradc.yaml | 16 +-
.../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
.../bindings/iio/adc/ti,ads1015.yaml | 8 +-
.../bindings/iio/adc/ti,tsc2046.yaml | 32 ++--
.../bindings/iio/dac/adi,ad3552r.yaml | 40 ++---
.../bindings/iio/dac/adi,ad5766.yaml | 22 +--
.../bindings/iio/dac/adi,ad5770r.yaml | 88 +++++------
.../bindings/iio/dac/adi,ltc2688.yaml | 52 +++----
.../bindings/iio/dac/lltc,ltc2632.yaml | 16 +-
.../bindings/iio/frequency/adf4371.yaml | 10 +-
.../bindings/iio/gyroscope/adi,adxrs290.yaml | 14 +-
.../iio/gyroscope/nxp,fxas21002c.yaml | 26 ++--
.../bindings/iio/humidity/ti,hdc2010.yaml | 12 +-
.../bindings/iio/imu/adi,adis16475.yaml | 24 +--
.../bindings/iio/imu/bosch,bmi160.yaml | 32 ++--
.../bindings/iio/imu/invensense,icm42600.yaml | 30 ++--
.../bindings/iio/imu/nxp,fxos8700.yaml | 22 +--
.../iio/magnetometer/yamaha,yas530.yaml | 18 +--
.../bindings/iio/pressure/bmp085.yaml | 22 +--
.../bindings/iio/proximity/ams,as3935.yaml | 2 +-
.../bindings/iio/temperature/adi,ltc2983.yaml | 137 +++++++++---------
.../iio/temperature/maxim,max31865.yaml | 10 +-
34 files changed, 421 insertions(+), 422 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index 6b03c4efbb08..c07261c71013 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -58,34 +58,34 @@ unevaluatedProperties: false

examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;

- /* Example for a I2C device node */
- accelerometer@1d {
- compatible = "adi,adxl355";
- reg = <0x1d>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "DRDY";
- };
+ /* Example for a I2C device node */
+ accelerometer@1d {
+ compatible = "adi,adxl355";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "DRDY";
};
+ };
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;

- accelerometer@0 {
- compatible = "adi,adxl355";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "DRDY";
- };
+ accelerometer@0 {
+ compatible = "adi,adxl355";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "DRDY";
};
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 73a5c8f814cc..62465e36a590 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -37,32 +37,32 @@ unevaluatedProperties: false

examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;

- /* Example for a I2C device node */
- accelerometer@53 {
- compatible = "adi,adxl372";
- reg = <0x53>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
+ /* Example for a I2C device node */
+ accelerometer@53 {
+ compatible = "adi,adxl372";
+ reg = <0x53>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
};
+ };
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;

- accelerometer@0 {
- compatible = "adi,adxl372";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
+ accelerometer@0 {
+ compatible = "adi,adxl372";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
};
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index b97559f23b3a..ce7ba634643c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -44,11 +44,11 @@ examples:
#size-cells = <0>;

adc@2f {
- compatible = "adi,ad7091r5";
- reg = <0x2f>;
+ compatible = "adi,ad7091r5";
+ reg = <0x2f>;

- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 1d965124c488..04b12146959e 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -120,5 +120,5 @@ examples:
adi,rejection-60-Hz-enable;
adi,buffer-enable;
adi,burnout-currents-enable;
- };
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index b05652dfd4a2..7fa46df1f4fb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -117,25 +117,25 @@ examples:
#size-cells = <0>;

adc@0 {
- compatible = "adi,ad7606-8";
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cpol;
- spi-cpha;
-
- avcc-supply = <&adc_vref>;
-
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpio>;
-
- adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
- adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
- <&gpio 23 GPIO_ACTIVE_HIGH>,
- <&gpio 26 GPIO_ACTIVE_HIGH>;
- standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- adi,sw-mode;
+ compatible = "adi,ad7606-8";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ spi-cpha;
+
+ avcc-supply = <&adc_vref>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+ <&gpio 23 GPIO_ACTIVE_HIGH>,
+ <&gpio 26 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ adi,sw-mode;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
index 29641ce7175b..433ed2c9295f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -57,17 +57,17 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;

- adc1: adc@28 {
- reg = <0x28>;
- compatible = "adi,ad7991";
- interrupts = <13 2>;
- interrupt-parent = <&gpio6>;
+ adc1: adc@28 {
+ reg = <0x28>;
+ compatible = "adi,ad7991";
+ interrupts = <13 2>;
+ interrupt-parent = <&gpio6>;

- vcc-supply = <&vcc_3v3>;
- vref-supply = <&adc_vref>;
+ vcc-supply = <&vcc_3v3>;
+ vref-supply = <&adc_vref>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index 2d72ff6bcbc0..7aa748d6b7a0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -64,10 +64,10 @@ examples:
#size-cells = <0>;

adc@0 {
- compatible = "adi,ad9467";
- reg = <0>;
- clocks = <&adc_clk>;
- clock-names = "adc-clk";
+ compatible = "adi,ad9467";
+ reg = <0>;
+ clocks = <&adc_clk>;
+ clock-names = "adc-clk";
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 8e25773d69be..9996dd93f84b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -51,11 +51,11 @@ additionalProperties: false
examples:
- |
axi-adc@44a00000 {
- compatible = "adi,axi-adc-10.0.a";
- reg = <0x44a00000 0x10000>;
- dmas = <&rx_dma 0>;
- dma-names = "rx";
+ compatible = "adi,axi-adc-10.0.a";
+ reg = <0x44a00000 0x10000>;
+ dmas = <&rx_dma 0>;
+ dma-names = "rx";

- adi,adc-dev = <&spi_adc>;
+ adi,adc-dev = <&spi_adc>;
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index b71c951e6d02..9cd0fd539782 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -78,14 +78,14 @@ examples:
#include <dt-bindings/iio/adc/ingenic,adc.h>

adc@10070000 {
- compatible = "ingenic,jz4740-adc";
- #io-channel-cells = <1>;
+ compatible = "ingenic,jz4740-adc";
+ #io-channel-cells = <1>;

- reg = <0x10070000 0x30>;
+ reg = <0x10070000 0x30>;

- clocks = <&cgu JZ4740_CLK_ADC>;
- clock-names = "adc";
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";

- interrupt-parent = <&intc>;
- interrupts = <18>;
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index d0a7ed26d9ea..e4b362113509 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -54,8 +54,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
maxadc: adc@0 {
compatible = "maxim,max1027";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 58b12fe8070c..ef8d51e74c08 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -54,8 +54,8 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;

adc@0 {
compatible = "maxim,max1241";
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
index d186b713d6a7..58ea1ca4a5ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -160,7 +160,7 @@ examples:
};
ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
- };
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index c8cbfd3444be..b3a626389870 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -40,12 +40,12 @@ additionalProperties: false
examples:
- |
pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmic_rradc: adc@4500 {
- compatible = "qcom,pmi8998-rradc";
- reg = <0x4500>;
- #io-channel-cells = <1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic_rradc: adc@4500 {
+ compatible = "qcom,pmi8998-rradc";
+ reg = <0x4500>;
+ #io-channel-cells = <1>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index dca6cfe1e88e..582d0a03b814 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -142,7 +142,7 @@ examples:
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
- };
+ };
};

- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2c3c2cf2145c..2127d639a768 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -104,12 +104,12 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
- reg = <0>;
+ reg = <0>;
};
channel@4 {
- reg = <4>;
- ti,gain = <3>;
- ti,datarate = <5>;
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <5>;
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 32c52f9fe18b..866a05c9db36 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -83,36 +83,36 @@ examples:
#size-cells = <0>;

channel@0 {
- reg = <0>;
+ reg = <0>;
};
channel@1 {
- reg = <1>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@2 {
- reg = <2>;
+ reg = <2>;
};
channel@3 {
- reg = <3>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@4 {
- reg = <4>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@5 {
- reg = <5>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@6 {
- reg = <6>;
+ reg = <6>;
};
channel@7 {
- reg = <7>;
+ reg = <7>;
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fee0f023a8c8..96340a05754c 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -192,26 +192,26 @@ additionalProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
- ad3552r@0 {
- compatible = "adi,ad3552r";
- reg = <0>;
- spi-max-frequency = <20000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- channel@0 {
- reg = <0>;
- adi,output-range-microvolt = <0 10000000>;
- };
- channel@1 {
- reg = <1>;
- custom-output-range-config {
- adi,gain-offset = <5>;
- adi,gain-scaling-p-inv-log2 = <1>;
- adi,gain-scaling-n-inv-log2 = <2>;
- adi,rfb-ohms = <1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ad3552r@0 {
+ compatible = "adi,ad3552r";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,output-range-microvolt = <0 10000000>;
+ };
+ channel@1 {
+ reg = <1>;
+ custom-output-range-config {
+ adi,gain-offset = <5>;
+ adi,gain-scaling-p-inv-log2 = <1>;
+ adi,gain-scaling-n-inv-log2 = <2>;
+ adi,rfb-ohms = <1>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index 3c8784a54d2c..212c936bab8d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -51,15 +51,15 @@ additionalProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;

- ad5766@0 {
- compatible = "adi,ad5766";
- output-range-microvolts = <(-5000000) 5000000>;
- reg = <0>;
- spi-cpol;
- spi-max-frequency = <1000000>;
- reset-gpios = <&gpio 22 0>;
- };
- };
+ ad5766@0 {
+ compatible = "adi,ad5766";
+ output-range-microvolts = <(-5000000) 5000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-max-frequency = <1000000>;
+ reset-gpios = <&gpio 22 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 8e7da0de918f..82b0eed6a7b7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -147,49 +147,49 @@ unevaluatedProperties: false

examples:
- |
- spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ad5770r@0 {
- compatible = "adi,ad5770r";
- reg = <0>;
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>;
- adi,external-resistor;
- reset-gpios = <&gpio 22 0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@0 {
- reg = <0>;
- adi,range-microamp = <0 300000>;
- };
-
- channel@1 {
- reg = <1>;
- adi,range-microamp = <0 140000>;
- };
-
- channel@2 {
- reg = <2>;
- adi,range-microamp = <0 55000>;
- };
-
- channel@3 {
- reg = <3>;
- adi,range-microamp = <0 45000>;
- };
-
- channel@4 {
- reg = <4>;
- adi,range-microamp = <0 45000>;
- };
-
- channel@5 {
- reg = <5>;
- adi,range-microamp = <0 45000>;
- };
- };
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ad5770r@0 {
+ compatible = "adi,ad5770r";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ adi,external-resistor;
+ reset-gpios = <&gpio 22 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ adi,range-microamp = <0 300000>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,range-microamp = <0 140000>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ adi,range-microamp = <0 55000>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ adi,range-microamp = <0 45000>;
+ };
};
+ };
...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
index 15cc6bf59b13..f22ef710ecde 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -116,32 +116,32 @@ examples:
- |

spi {
- #address-cells = <1>;
- #size-cells = <0>;
- ltc2688: ltc2688@0 {
- compatible = "adi,ltc2688";
- reg = <0>;
-
- vcc-supply = <&vcc>;
- iovcc-supply = <&vcc>;
- vref-supply = <&vref>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- channel@0 {
- reg = <0>;
- adi,toggle-mode;
- adi,overrange;
- };
-
- channel@1 {
- reg = <1>;
- adi,output-range-microvolt = <0 10000000>;
-
- clocks = <&clock_tgp3>;
- adi,toggle-dither-input = <2>;
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ltc2688: ltc2688@0 {
+ compatible = "adi,ltc2688";
+ reg = <0>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ vref-supply = <&vref>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ adi,overrange;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,output-range-microvolt = <0 10000000>;
+
+ clocks = <&clock_tgp3>;
+ adi,toggle-dither-input = <2>;
+ };
+ };
};

...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index c9e3be3b5754..733edc7d6d17 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -64,14 +64,14 @@ examples:
};

spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;

- dac@0 {
- compatible = "lltc,ltc2632-l12";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>;
- };
+ dac@0 {
+ compatible = "lltc,ltc2632-l12";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index a0a5e5919987..1cb2adaf66f9 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -58,11 +58,11 @@ examples:
#size-cells = <0>;

frequency@0 {
- compatible = "adi,adf4371";
- reg = <0>;
- spi-max-frequency = <1000000>;
- clocks = <&adf4371_clkin>;
- clock-names = "clkin";
+ compatible = "adi,adf4371";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ clocks = <&adf4371_clkin>;
+ clock-names = "clkin";
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
index 0ae2464b9bc4..3d94dd4612c4 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -50,13 +50,13 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
gyro@0 {
- compatible = "adi,adxrs290";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpol;
- spi-cpha;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ compatible = "adi,adxrs290";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 052dccbb5eea..297d519d68f2 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -70,15 +70,15 @@ examples:
#size-cells = <0>;

gyroscope@20 {
- compatible = "nxp,fxas21002c";
- reg = <0x20>;
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;

- vdd-supply = <&reg_peri_3p15v>;
- vddio-supply = <&reg_peri_3p15v>;
+ vdd-supply = <&reg_peri_3p15v>;
+ vddio-supply = <&reg_peri_3p15v>;

- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
};
};
spi {
@@ -86,13 +86,13 @@ examples:
#size-cells = <0>;

gyroscope@0 {
- compatible = "nxp,fxas21002c";
- reg = <0x0>;
+ compatible = "nxp,fxas21002c";
+ reg = <0x0>;

- spi-max-frequency = <2000000>;
+ spi-max-frequency = <2000000>;

- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index a36173b0c654..a2bc1fa92da0 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -36,11 +36,11 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;

- humidity@40 {
- compatible = "ti,hdc2010";
- reg = <0x40>;
- };
+ humidity@40 {
+ compatible = "ti,hdc2010";
+ reg = <0x40>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index 5dbfae80bb28..c73533c54588 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -114,17 +114,17 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- adis16475: adis16475-3@0 {
- compatible = "adi,adis16475-3";
- reg = <0>;
- spi-cpha;
- spi-cpol;
- spi-max-frequency = <2000000>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adis16475: adis16475-3@0 {
+ compatible = "adi,adis16475-3";
+ reg = <0>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <2000000>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index a0760382548d..47cfba939ca6 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -64,16 +64,16 @@ examples:
#size-cells = <0>;

bmi160@68 {
- compatible = "bosch,bmi160";
- reg = <0x68>;
- vdd-supply = <&pm8916_l17>;
- vddio-supply = <&pm8916_l6>;
- interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
- "0", "0", "1";
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
};
};
- |
@@ -84,11 +84,11 @@ examples:
#size-cells = <0>;

bmi160@0 {
- compatible = "bosch,bmi160";
- reg = <0>;
- spi-max-frequency = <10000000>;
- interrupt-parent = <&gpio2>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ compatible = "bosch,bmi160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 3ecfb3f086bc..7cd05bcbee31 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -70,12 +70,12 @@ examples:
#size-cells = <0>;

icm42605@68 {
- compatible = "invensense,icm42605";
- reg = <0x68>;
- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&vdd>;
- vddio-supply = <&vddio>;
+ compatible = "invensense,icm42605";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
};
};
- |
@@ -86,14 +86,14 @@ examples:
#size-cells = <0>;

icm42602@0 {
- compatible = "invensense,icm42602";
- reg = <0>;
- spi-max-frequency = <24000000>;
- spi-cpha;
- spi-cpol;
- interrupt-parent = <&gpio1>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&vdd>;
- vddio-supply = <&vddio>;
+ compatible = "invensense,icm42602";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index db6a145840f7..688100b240bc 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -54,12 +54,12 @@ examples:
#size-cells = <0>;

fxos8700@1e {
- compatible = "nxp,fxos8700";
- reg = <0x1e>;
+ compatible = "nxp,fxos8700";
+ reg = <0x1e>;

- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
};
};
- |
@@ -70,12 +70,12 @@ examples:
#size-cells = <0>;

fxos8700@0 {
- compatible = "nxp,fxos8700";
- reg = <0>;
+ compatible = "nxp,fxos8700";
+ reg = <0>;

- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
index 9438fffaf0ba..877226e9219b 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -91,12 +91,12 @@ examples:
#size-cells = <0>;

magnetometer@2e {
- compatible = "yamaha,yas530";
- reg = <0x2e>;
- vdd-supply = <&ldo1_reg>;
- iovdd-supply = <&ldo2_reg>;
- reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
- interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ compatible = "yamaha,yas530";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
+ iovdd-supply = <&ldo2_reg>;
+ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
};
};

@@ -105,8 +105,8 @@ examples:
#size-cells = <0>;

magnetometer@2e {
- compatible = "yamaha,yas539";
- reg = <0x2e>;
- vdd-supply = <&ldo1_reg>;
+ compatible = "yamaha,yas539";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 256f537840e4..63885af6a74b 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -61,15 +61,15 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- pressure@77 {
- compatible = "bosch,bmp085";
- reg = <0x77>;
- interrupt-parent = <&gpio0>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- vddd-supply = <&foo>;
- vdda-supply = <&bar>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pressure@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ vddd-supply = <&foo>;
+ vdda-supply = <&bar>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
index 710d3b9a86d9..c999994e19e3 100644
--- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -60,7 +60,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- lightning@0 {
+ lightning@0 {
compatible = "ams,as3935";
reg = <0>;
spi-max-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 3e5b7b47bcdc..f44fc32ce87e 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -472,75 +472,74 @@ examples:
#size-cells = <0>;

temperature-sensor@0 {
- compatible = "adi,ltc2983";
- reg = <0>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupts = <20 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio>;
-
- thermocouple@18 {
- reg = <18>;
- adi,sensor-type = <8>; //Type B
- adi,sensor-oc-current-microamp = <10>;
- adi,cold-junction-handle = <&diode5>;
- };
-
- diode5: diode@5 {
- reg = <5>;
- adi,sensor-type = <28>;
- };
-
- rsense2: rsense@2 {
- reg = <2>;
- adi,sensor-type = <29>;
- adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
- };
-
- rtd@14 {
- reg = <14>;
- adi,sensor-type = <15>; //PT1000
- /*2-wire, internal gnd, no current rotation*/
- adi,number-of-wires = <2>;
- adi,rsense-share;
- adi,excitation-current-microamp = <500>;
- adi,rsense-handle = <&rsense2>;
- };
-
- adc@10 {
- reg = <10>;
- adi,sensor-type = <30>;
- adi,single-ended;
- };
-
- thermistor@12 {
- reg = <12>;
- adi,sensor-type = <26>; //Steinhart
- adi,rsense-handle = <&rsense2>;
- adi,custom-steinhart = <0x00f371ec 0x12345678
- 0x2c0f8733 0x10018c66 0xa0feaccd
- 0x90021d99>; //6 entries
- };
-
- thermocouple@20 {
- reg = <20>;
- adi,sensor-type = <9>; //custom thermocouple
- adi,single-ended;
- adi,custom-thermocouple =
- /bits/ 64 <(-50220000) 0>,
- /bits/ 64 <(-30200000) 99100000>,
- /bits/ 64 <(-5300000) 135400000>,
- /bits/ 64 <0 273150000>,
- /bits/ 64 <40200000 361200000>,
- /bits/ 64 <55300000 522100000>,
- /bits/ 64 <88300000 720300000>,
- /bits/ 64 <132200000 811200000>,
- /bits/ 64 <188700000 922500000>,
- /bits/ 64 <460400000 1000000000>; //10 pairs
- };
-
+ compatible = "adi,ltc2983";
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+
+ thermocouple@18 {
+ reg = <18>;
+ adi,sensor-type = <8>; //Type B
+ adi,sensor-oc-current-microamp = <10>;
+ adi,cold-junction-handle = <&diode5>;
+ };
+
+ diode5: diode@5 {
+ reg = <5>;
+ adi,sensor-type = <28>;
+ };
+
+ rsense2: rsense@2 {
+ reg = <2>;
+ adi,sensor-type = <29>;
+ adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+ };
+
+ rtd@14 {
+ reg = <14>;
+ adi,sensor-type = <15>; //PT1000
+ /*2-wire, internal gnd, no current rotation*/
+ adi,number-of-wires = <2>;
+ adi,rsense-share;
+ adi,excitation-current-microamp = <500>;
+ adi,rsense-handle = <&rsense2>;
+ };
+
+ adc@10 {
+ reg = <10>;
+ adi,sensor-type = <30>;
+ adi,single-ended;
+ };
+
+ thermistor@12 {
+ reg = <12>;
+ adi,sensor-type = <26>; //Steinhart
+ adi,rsense-handle = <&rsense2>;
+ adi,custom-steinhart = <0x00f371ec 0x12345678
+ 0x2c0f8733 0x10018c66 0xa0feaccd
+ 0x90021d99>; //6 entries
+ };
+
+ thermocouple@20 {
+ reg = <20>;
+ adi,sensor-type = <9>; //custom thermocouple
+ adi,single-ended;
+ adi,custom-thermocouple =
+ /bits/ 64 <(-50220000) 0>,
+ /bits/ 64 <(-30200000) 99100000>,
+ /bits/ 64 <(-5300000) 135400000>,
+ /bits/ 64 <0 273150000>,
+ /bits/ 64 <40200000 361200000>,
+ /bits/ 64 <55300000 522100000>,
+ /bits/ 64 <88300000 720300000>,
+ /bits/ 64 <132200000 811200000>,
+ /bits/ 64 <188700000 922500000>,
+ /bits/ 64 <460400000 1000000000>; //10 pairs
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index 66394e17fcc8..7cc365e0ebc8 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -44,11 +44,11 @@ examples:
#size-cells = <0>;

temperature-sensor@0 {
- compatible = "maxim,max31865";
- reg = <0>;
- spi-max-frequency = <400000>;
- spi-cpha;
- maxim,3-wire;
+ compatible = "maxim,max31865";
+ reg = <0>;
+ spi-max-frequency = <400000>;
+ spi-cpha;
+ maxim,3-wire;
};
};
...
--
2.34.1