[PATCH v7 2/3] mfd: axp20x: Add support for AXP313a PMIC
From: Martin Botka
Date: Wed Jan 18 2023 - 16:03:44 EST
The AXP313a is a PMIC chip produced by X-Powers, it can be connected via
an I2C bus.
The name AXP1530 seems to appear as well, and this is what is used in
the BSP driver. From all we know it's the same chip, just a different
name. However we have only seen AXP313a chips in the wild, so go with
this name.
Compared to the other AXP PMICs it's a rather simple affair: just three
DCDC converters, three LDOs, and no battery charging support.
Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Eventually advertise the device using the new compatible
string.
Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
drivers/mfd/axp20x-i2c.c | 2 ++
drivers/mfd/axp20x.c | 61 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 32 ++++++++++++++++++++
3 files changed, 95 insertions(+)
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index f49fbd307958..f061177cb18e 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -63,6 +63,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+ { .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID},
{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
{ },
@@ -76,6 +77,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
{ "axp209", 0 },
{ "axp221", 0 },
{ "axp223", 0 },
+ { "axp313a", 0 },
{ "axp803", 0 },
{ "axp806", 0 },
{ },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 01a6bbb6d266..ff15775f3c27 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -39,6 +39,7 @@ static const char * const axp20x_model_names[] = {
"AXP221",
"AXP223",
"AXP288",
+ "AXP313a",
"AXP803",
"AXP806",
"AXP809",
@@ -154,6 +155,24 @@ static const struct regmap_range axp806_writeable_ranges[] = {
regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
};
+static const struct regmap_range axp313a_writeable_ranges[] = {
+ regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_range axp313a_volatile_ranges[] = {
+ regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_access_table axp313a_writeable_table = {
+ .yes_ranges = axp313a_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
+};
+
+static const struct regmap_access_table axp313a_volatile_table = {
+ .yes_ranges = axp313a_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
+};
+
static const struct regmap_range axp806_volatile_ranges[] = {
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
};
@@ -272,6 +291,15 @@ static const struct regmap_config axp288_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config axp313a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp313a_writeable_table,
+ .volatile_table = &axp313a_volatile_table,
+ .max_register = AXP313A_IRQ_STATE,
+ .cache_type = REGCACHE_RBTREE,
+};
+
static const struct regmap_config axp806_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -415,6 +443,16 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
+static const struct regmap_irq axp313a_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP313A, PEK_RIS_EDGE, 0, 7),
+ INIT_REGMAP_IRQ(AXP313A, PEK_FAL_EDGE, 0, 6),
+ INIT_REGMAP_IRQ(AXP313A, PEK_SHORT, 0, 5),
+ INIT_REGMAP_IRQ(AXP313A, PEK_LONG, 0, 4),
+ INIT_REGMAP_IRQ(AXP313A, DCDC3_V_LOW, 0, 3),
+ INIT_REGMAP_IRQ(AXP313A, DCDC2_V_LOW, 0, 2),
+ INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH, 0, 0),
+};
+
static const struct regmap_irq axp803_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN, 0, 6),
@@ -548,6 +586,17 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
};
+static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
+ .name = "axp313a_irq_chip",
+ .status_base = AXP313A_IRQ_STATE,
+ .ack_base = AXP313A_IRQ_STATE,
+ .unmask_base = AXP313A_IRQ_EN,
+ .init_ack_masked = true,
+ .irqs = axp313a_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp313a_regmap_irqs),
+ .num_regs = 1,
+};
+
static const struct regmap_irq_chip axp803_regmap_irq_chip = {
.name = "axp803",
.status_base = AXP20X_IRQ1_STATE,
@@ -676,6 +725,12 @@ static const struct mfd_cell axp152_cells[] = {
},
};
+static struct mfd_cell axp313a_cells[] = {
+ {
+ .name = "axp20x-regulator",
+ },
+};
+
static const struct resource axp288_adc_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
};
@@ -892,6 +947,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
axp20x->irq_flags = IRQF_TRIGGER_LOW;
break;
+ case AXP313A_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
+ axp20x->cells = axp313a_cells;
+ axp20x->regmap_cfg = &axp313a_regmap_config;
+ axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
+ break;
case AXP803_ID:
axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
axp20x->cells = axp803_cells;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 2058194807bd..12e4fc3e8391 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -17,6 +17,7 @@ enum axp20x_variants {
AXP221_ID,
AXP223_ID,
AXP288_ID,
+ AXP313A_ID,
AXP803_ID,
AXP806_ID,
AXP809_ID,
@@ -91,6 +92,17 @@ enum axp20x_variants {
#define AXP22X_ALDO3_V_OUT 0x2a
#define AXP22X_CHRG_CTRL3 0x35
+#define AXP313A_ON_INDICATE 0x00
+#define AXP313A_OUTPUT_CONTROL 0x10
+#define AXP313A_DCDC1_CONRTOL 0x13
+#define AXP313A_DCDC2_CONRTOL 0x14
+#define AXP313A_DCDC3_CONRTOL 0x15
+#define AXP313A_ALDO1_CONRTOL 0x16
+#define AXP313A_DLDO1_CONRTOL 0x17
+#define AXP313A_OUTPUT_MONITOR 0x1d
+#define AXP313A_IRQ_EN 0x20
+#define AXP313A_IRQ_STATE 0x21
+
#define AXP806_STARTUP_SRC 0x00
#define AXP806_CHIP_ID 0x03
#define AXP806_PWR_OUT_CTRL1 0x10
@@ -322,6 +334,16 @@ enum {
AXP22X_REG_ID_MAX,
};
+enum {
+ AXP313A_DCDC1 = 0,
+ AXP313A_DCDC2,
+ AXP313A_DCDC3,
+ AXP313A_LDO1,
+ AXP313A_LDO2,
+ AXP313A_RTC_LDO,
+ AXP313A_REG_ID_MAX,
+};
+
enum {
AXP806_DCDCA = 0,
AXP806_DCDCB,
@@ -548,6 +570,16 @@ enum axp288_irqs {
AXP288_IRQ_BC_USB_CHNG,
};
+enum axp313a_irqs {
+ AXP313A_IRQ_DIE_TEMP_HIGH,
+ AXP313A_IRQ_DCDC2_V_LOW = 2,
+ AXP313A_IRQ_DCDC3_V_LOW,
+ AXP313A_IRQ_PEK_LONG,
+ AXP313A_IRQ_PEK_SHORT,
+ AXP313A_IRQ_PEK_FAL_EDGE,
+ AXP313A_IRQ_PEK_RIS_EDGE,
+};
+
enum axp803_irqs {
AXP803_IRQ_ACIN_OVER_V = 1,
AXP803_IRQ_ACIN_PLUGIN,
--
2.39.0