[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

From: Jordan Chang
Date: Thu Jan 19 2023 - 05:22:01 EST

Next message: Raghavendra K T: "Re: [RFC PATCH V1 1/1] sched/numa: Enhance vma scanning logic"
Previous message: Jordan Chang: "[PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add initial version of device tree for Ufispace NCPlite platform
which is equipped with AST2600-based BMC.

Signed-off-by: Jordan Chang <jordan.chang@xxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-ufispace-ncplite.dts | 360 ++++++++++++++++++
2 files changed, 361 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2ee9c043218b..d26e0651e805 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-inventec-transformers.dtb \
aspeed-bmc-tyan-s7106.dtb \
aspeed-bmc-tyan-s8036.dtb \
+ aspeed-bmc-ufispace-ncplite.dtb \
aspeed-bmc-vegman-n110.dtb \
aspeed-bmc-vegman-rx20.dtb \
aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Ufispace NCPLite BMC";
+ compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8 earlycon";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ fan-status-int-l {
+ label = "fan-status-int-l";
+ gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 2)>;
+ };
+
+ allpwr-good {
+ label = "allpwr-good";
+ gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(V, 4)>;
+ };
+
+ psu0-alert-n {
+ label = "psu0-alert-n";
+ gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(V, 1)>;
+ };
+
+ psu1-alert-n {
+ label = "psu1-alert-n";
+ gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(V, 2)>;
+ };
+
+ int-thermal-alert {
+ label = "int-thermal-alert";
+ gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(P, 2)>;
+ };
+
+ cpu-caterr-l {
+ label = "cpu-caterr-l";
+ gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(N, 3)>;
+ };
+
+ cpu-thermtrip-l {
+ label = "cpu-thermtrip-l";
+ gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(V, 5)>;
+ };
+
+ psu0-presence-l {
+ label = "psu0-presence-l";
+ gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ psu1-presence-l {
+ label = "psu1-presence-l";
+ gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 7)>;
+ };
+
+ psu0-power-ok {
+ label = "psu0-power-ok";
+ gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(M, 4)>;
+ };
+
+ psu1-power-ok {
+ label = "psu1-power-ok";
+ gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(M, 5)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+ linux,code = <14>;
+ };
+ };
+};
+
+&mac2 {
+ status = "okay";
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&udc {
+ status = "okay";
+};
+
+&adc0 {
+ vref = <2500>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref = <2500>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ lm75@49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ lm86@4c {
+ compatible = "national,lm86";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ lm75@4f {
+ cpmpatible = "national,lm75";
+ reg = <0x4f>;
+ };
+
+ fan_ioexp: pca9535@20 {
+ compatible = "nxp,pca9535";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","presence-fan0","",
+ "","","presence-fan1","",
+ "","","presence-fan2","",
+ "","","presence-fan3","";
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <1>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <1>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","reset-button","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "power-chassis-control0","power-chassis-control1","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","power-chassis-good","","","";
+};
--
2.39.0

--
******************************
This e-mail is confidential. If you are not
the intended recipient, you must not disclose, distribute or use the
information in it as this could be a breach of confidentiality.If you have
received this message in error, please advise us immediately by return
e-mail and delete the document. The address from which this message has
been sent is strictly for business mail only and the company reserves the
right to monitor the contents of communications and take action where and
when it is deemed necessary.
Thank you for your co-operation.

Next message: Raghavendra K T: "Re: [RFC PATCH V1 1/1] sched/numa: Enhance vma scanning logic"
Previous message: Jordan Chang: "[PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]