Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes

[Krzysztof Kozlowski]

On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Update VA, RX and TX macro and lpass_tlmm clock properties and
> enable them.

Everything is an update and this does not explain what exactly you are
updating in the nodes and why.

> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
>  .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi  | 59 ++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 81e0f3a..674b01a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -8,8 +8,67 @@
>  
>  #include <dt-bindings/sound/qcom,q6afe.h>
>  
> +/delete-node/ &lpass_rx_macro;

Why?

> +/delete-node/ &lpass_tx_macro;
> +/delete-node/ &lpass_va_macro;
> +
>  /{
>  	/* BOARD-SPECIFIC TOP LEVEL NODES */
> +	lpass_rx_macro: codec@3200000 {
> +		compatible = "qcom,sc7280-lpass-rx-macro";
> +		reg = <0 0x03200000 0 0x1000>;

Why? They are the same.

> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;

Still the same...

> +
> +		clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +			 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +			 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +			 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> +			 <&lpass_va_macro>;
> +
> +		clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";

This is different...

> +
> +		#clock-cells = <0>;
> +		#sound-dai-cells = <1>;

But this not.


Best regards,
Krzysztof