[PATCH v4 10/12] PCI: qcom: Add SM8550 PCIe support

[Abel Vesa]

Add compatible for both PCIe found on SM8550.
Also add the cnoc_pcie_sf_axi clock needed by the SM8550.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---

The v3 of this patchset is:
https://lore.kernel.org/all/20230119112453.3393911-1-abel.vesa@xxxxxxxxxx/

Changes since v3:
 * renamed cnoc_pcie_sf_axi to cnoc_sf_axi

Changes since v2:
 * none
 
Changes since v1:
 * changed the subject line prefix for the patch to match the history,
   like Bjorn Helgaas suggested.
 * added Konrad's R-b tag


 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 77e5dc7b88ad..30f74bc51dbf 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -182,7 +182,7 @@ struct qcom_pcie_resources_2_3_3 {
 
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[12];
+	struct clk_bulk_data clks[13];
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
@@ -1208,6 +1208,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[idx++].id = "noc_aggr_4";
 	res->clks[idx++].id = "noc_aggr_south_sf";
 	res->clks[idx++].id = "cnoc_qx";
+	res->clks[idx++].id = "cnoc_sf_axi";
 
 	num_opt_clks = idx - num_clks;
 	res->num_clks = idx;
@@ -1828,6 +1829,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
+	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
 	{ }
 };
 
-- 
2.34.1