[PATCH 0/2] Add MediaTek MT8365 SPI support

[Alexandre Mergnat]

Hi,
This patch series adds SPI support for MT8365-EVK board.
The SPIDEV is enabled, it can be used through the board pin header,
as described directly on the PCB.

This series depends to another one which add support for
MT8365 SoC and EVK board. Link [1].

Test:
- Loopback MOSI and MISO pins
- Issue the following command:
spidev_test -D /dev/spidev0.0 -v
- RX line should be the same as TX line.

Regards,
Alex

[1]: https://lore.kernel.org/linux-mediatek/20230101220149.3035048-1-bero@xxxxxxxxxxxx/

To: Rob Herring <robh+dt@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
To: Matthias Brugger <matthias.bgg@xxxxxxxxx>
To: Mark Brown <broonie@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-spi@xxxxxxxxxxxxxxx
Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>

---
Alexandre Mergnat (2):
      arm64: dts: mediatek: add spidev support for mt8365-evk board
      spi: spidev: add new mediatek support

 arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 24 ++++++++++++++++++++++++
 drivers/spi/spidev.c                        |  2 ++
 2 files changed, 26 insertions(+)
---
base-commit: 8b6cfcce3ce939db11166680a57253c39110f07e
change-id: 20230118-mt8365-spi-support-0d96bc55a4a0

Best regards,
-- 
Alexandre Mergnat <amergnat@xxxxxxxxxxxx>