Re: [PATCH V12 XDMA 0/2] xilinx XDMA driver

[Martin Tůma]

On 19. 01. 23 17:32, Lizhi Hou wrote:
> Hello,
>
> This V12 of patch series is to provide the platform driver to support the
> Xilinx XDMA subsystem. The XDMA subsystem is used in conjunction with the
> PCI Express IP block to provide high performance data transfer between host
> memory and the card's DMA subsystem. It also provides up to 16 user
> interrupt wires to user logic that generate interrupts to the host.
>
>              +-------+       +-------+       +-----------+
>     PCIe     |       |       |       |       |           |
>     Tx/Rx    |       |       |       |  AXI  |           |
>   <=======>  | PCIE  | <===> | XDMA  | <====>| User Logic|
>              |       |       |       |       |           |
>              +-------+       +-------+       +-----------+
>
> The XDMA has been used for Xilinx Alveo PCIe devices.
> And it is also integrated into Versal ACAP DMA and Bridge Subsystem.
>      https://www.xilinx.com/products/boards-and-kits/alveo.html
>      https://docs.xilinx.com/r/en-US/pg344-pcie-dma-versal/Introduction-to-the-DMA-and-Bridge-Subsystems
>
> The device driver for any FPGA based PCIe device which leverages XDMA can
> call the standard dmaengine APIs to discover and use the XDMA subsystem
> without duplicating the XDMA driver code in its own driver.
>
> Changes since v11:
> - minor fixes based on review comments.
>
> Changes since v10:
> - Added Tested-by Martin Tuma tumic@xxxxxxxxxx
>
> Changes since v9:
> - Cleanup code based on review comments.
>
> Changes since v8:
> - Fixed test robot failure on s390.
>
> Changes since v7:
> - Used pci device pointer for dma_pool_create().
>
> Changes since v6:
> - Fixed descriptor filling bug.
>
> Changes since v5:
> - Modified user logic interrupt APIs to handle user logic IP which does not
>    have its own register to enable/disable interrupt.
> - Clean up code based on review comments.
>
> Changes since v4:
> - Modified user logic interrupt APIs.
>
> Changes since v3:
> - Added one patch to support user logic interrupt.
>
> Changes since v2:
> - Removed tasklet.
> - Fixed regression bug introduced to V2.
> - Test Robot warning.
>
> Changes since v1:
> - Moved filling hardware descriptor to xdma_prep_device_sg().
> - Changed hardware descriptor enum to "struct xdma_hw_desc".
> - Minor changes from code review comments.
>
> Lizhi Hou (2):
>    dmaengine: xilinx: xdma: Add xilinx xdma driver
>    dmaengine: xilinx: xdma: Add user logic interrupt support
>
>   MAINTAINERS                            |  11 +
>   drivers/dma/Kconfig                    |  14 +
>   drivers/dma/xilinx/Makefile            |   1 +
>   drivers/dma/xilinx/xdma-regs.h         | 166 +++++
>   drivers/dma/xilinx/xdma.c              | 974 +++++++++++++++++++++++++
>   include/linux/dma/amd_xdma.h           |  16 +
>   include/linux/platform_data/amd_xdma.h |  34 +
>   7 files changed, 1216 insertions(+)
>   create mode 100644 drivers/dma/xilinx/xdma-regs.h
>   create mode 100644 drivers/dma/xilinx/xdma.c
>   create mode 100644 include/linux/dma/amd_xdma.h
>   create mode 100644 include/linux/platform_data/amd_xdma.h

I have re-tested this (v12) driver version on our mgb4 PCIe card and 
everything seems to work fine.

M.