[PATCH v2 3/5] arm64: dts: qcom: sm8150: Don't start Adreno in headless mode

[Konrad Dybcio]

Now that there's display support, there is no reason to assume the default
mode for Adreno should be headless. Keep it like that for boards that
previously enabled it, so as not to create regressions though.

Tested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> # On Sony Xperia 5
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi    | 10 +---------
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 3331ee957d64..0ee5309408b9 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -359,6 +359,11 @@ &gmu {
 };
 
 &gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 46b5cf9a1192..9dfecbf89b21 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -354,6 +354,11 @@ &gmu {
 };
 
 &gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index fd20096cfc6e..e3059f9b98de 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2133,15 +2133,7 @@ compute-cb@3 {
 		};
 
 		gpu: gpu@2c00000 {
-			/*
-			 * note: the amd,imageon compatible makes it possible
-			 * to use the drm/msm driver without the display node,
-			 * make sure to remove it when display node is added
-			 */
-			compatible = "qcom,adreno-640.1",
-				     "qcom,adreno",
-				     "amd,imageon";
-
+			compatible = "qcom,adreno-640.1", "qcom,adreno";
 			reg = <0 0x02c00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
 
-- 
2.39.1