[PATCH v4 0/2] Add support for the AUO A030JTN01 TFT LCD

[Christophe Branchereau]

Changes since v3:
  Reworked the few init registers that are used for hblk, vblk and standby
  Use of dev_err_probe() instead of dev_err()
  priv->panel_info = spi_get_device_match_data(spi);

  restored spi node to dt-bindings that was missing in v3
----

Changes since v2:
 - added macros for stanby mode (untested, please review @pcercuei)
 - added SPI table_id
 - changed description in the bindings to describe the hw more

Changes since v1:
- fixed the dt-bindings maintainer email adress
- dropped backlight, port, power-supply and reset-gpios as they're
  provided by panel-common.yaml as pointed by Krzysztof Kozlowski
- changed reg: true to reg : maxItems: 1


Christophe Branchereau (1):
  drm/panel: Add driver for the AUO A030JTN01 TFT LCD

Paul Cercueil (1):
  dt-bindings: display/panel: Add AUO A030JTN01

 .../bindings/display/panel/auo,a030jtn01.yaml |  60 ++++
 drivers/gpu/drm/panel/Kconfig                 |   8 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-auo-a030jtn01.c   | 308 ++++++++++++++++++
 4 files changed, 377 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-auo-a030jtn01.c

-- 
2.39.0