Re: [PATCH 13/15] dt-bindings: pinctrl: add support for Ambarella

[Krzysztof Kozlowski]

On 23/01/2023 08:32, Li Chen wrote:
> Add a Ambarella compatible.
> 
> Signed-off-by: Li Chen <lchen@xxxxxxxxxxxxx>
> Change-Id: I8bcab3b763bdc7e400a04cc46589f0f694028a66
> ---
>  .../bindings/pinctrl/ambarella,pinctrl.yaml   | 160 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/ambarella,pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/ambarella,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ambarella,pinctrl.yaml
> new file mode 100644
> index 000000000000..51f5a9cc4714
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ambarella,pinctrl.yaml
> @@ -0,0 +1,160 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ambarella,pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ambarella PIN controller
> +
> +maintainers:
> +  - Li Chen <lchen@xxxxxxxxxxxxx>
> +
> +description: |
> +  The pins controlled by Ambarella SoC chip are organized in banks, each bank
> +  has 32 pins.  Each pin has at least 2 multiplexing functions, and generally,
> +  the first function is GPIO.
> +
> +  The PINCTRL node acts as a container for an arbitrary number of subnodes. And
> +  these subnodes will fall into two categories.
> +
> +  One is for GPIO, please see the "GPIO node" section for detail, and another one
> +  is to set up a group of pins for a function, both pin configurations and mux
> +  selection, and it's called group node in the binding document.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: ambarella,pinctrl
> +
> +  reg:
> +    minItems: 4
> +    maxItems: 4
> +

Same problems as with other patches. You need to fix all of my previous
comments.

Best regards,
Krzysztof