Re: [PATCH v2 1/4] arm64: dts: qcom: use generic node name for Bluetooth

[Konrad Dybcio]

On 23.01.2023 13:56, Krzysztof Kozlowski wrote:
> Node names should be generic (as Devicetree spec mandates), so use
> "bluetooth" for BT node.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> 
> Changes since v1:
> 1. Fix also msm8996-xiaomi-common
> ---
>  arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +-
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts             | 2 +-
>  arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi          | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> index 5b47b8de69da..2acfed28e3cb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
> @@ -229,7 +229,7 @@ &blsp1_uart2 {
>  	status = "okay";
>  	label = "QCA_UART";
>  
> -	bluetooth: qca6174a {
> +	bluetooth: bluetooth {
>  		compatible = "qcom,qca6174-bt";
>  
>  		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 774f9d45f051..6ea8dd7d3e01 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -430,7 +430,7 @@ &uart3 {
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-1 = <&qup_uart3_sleep>;
>  
> -	bluetooth: wcn3990-bt {
> +	bluetooth: bluetooth {
>  		compatible = "qcom,wcn3990-bt";
>  		vddio-supply = <&vreg_l10a_1p8>;
>  		vddxo-supply = <&vreg_l1c_1p8>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index a78075155310..e19178c1ec44 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -862,7 +862,7 @@ &uart6 {
>  
>  	pinctrl-0 = <&qup_uart6_4pin>;
>  
> -	bluetooth: wcn3990-bt {
> +	bluetooth: bluetooth {
>  		compatible = "qcom,wcn3990-bt";
>  		vddio-supply = <&src_pp1800_s4a>;
>  		vddxo-supply = <&pp1800_l7a_wcn3990>;