[PATCH v2 3/4] drm/bridge: tfp410: Fix logic to configured polled HPD

[Jonathan Cormier]

From: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx>

The logic to configure polling (vs async/irq notification) of hot-plug
events was not correct.  If the connected bridge requires polling,
then inform the upstream bridge we also require polling.

Signed-off-by: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/bridge/ti-tfp410.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index bb3f8d0ff207..41007d05d584 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -155,7 +155,7 @@ static int tfp410_attach(struct drm_bridge *bridge,
 		return -ENODEV;
 	}
 
-	if (dvi->next_bridge->ops & DRM_BRIDGE_OP_DETECT)
+	if (dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD)
 		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 	else
 		dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;

-- 
2.25.1