Use the correct compatible so that the driver can probe properly.
Fixes: a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d66dcd8fe61f..8d85a3139849 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2873,7 +2873,7 @@ opp-358000000 {
};
mdss_dsi0_phy: phy@ae94400 {
- compatible = "qcom,dsi-phy-5nm-8450";
+ compatible = "qcom,sm8450-dsi-phy-5nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
<0 0x0ae94900 0 0x260>;
@@ -2946,7 +2946,7 @@ mdss_dsi1_out: endpoint {
};
mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,dsi-phy-5nm-8450";
+ compatible = "qcom,sm8450-dsi-phy-5nm";
reg = <0 0x0ae96400 0 0x200>,
<0 0x0ae96600 0 0x280>,
<0 0x0ae96900 0 0x260>;