Re: [PATCH v1] media: i2c: ov5640: Implement get_mbus_config

[Jacopo Mondi]

Hi Marcel

On Fri, Jan 27, 2023 at 04:12:44PM +0100, Marcel Ziswiler wrote:
> From: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
>
> Implement the introduced get_mbus_config operation to report the
> number of used data lanes on the MIPI CSI-2 interface.
>

OV5640 can operate in parallel mode too.

You can check how it currently configured with ov5640_is_csi2() and
populate struct v4l2_mbus_config accordingly.

Thanks
   j

> Signed-off-by: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
>
> ---
>
>  drivers/media/i2c/ov5640.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index e0f908af581b..42d43f0d1e1c 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -3733,6 +3733,19 @@ static int ov5640_init_cfg(struct v4l2_subdev *sd,
>  	return 0;
>  }
>
> +static int ov5640_get_mbus_config(struct v4l2_subdev *sd,
> +				   unsigned int pad,
> +				   struct v4l2_mbus_config *cfg)
> +{
> +	struct ov5640_dev *sensor = to_ov5640_dev(sd);
> +
> +	cfg->type = V4L2_MBUS_CSI2_DPHY;
> +	cfg->bus.mipi_csi2.num_data_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes;
> +	cfg->bus.mipi_csi2.flags = 0;
> +
> +	return 0;
> +}
> +
>  static const struct v4l2_subdev_core_ops ov5640_core_ops = {
>  	.log_status = v4l2_ctrl_subdev_log_status,
>  	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> @@ -3753,6 +3766,7 @@ static const struct v4l2_subdev_pad_ops ov5640_pad_ops = {
>  	.get_selection = ov5640_get_selection,
>  	.enum_frame_size = ov5640_enum_frame_size,
>  	.enum_frame_interval = ov5640_enum_frame_interval,
> +	.get_mbus_config = ov5640_get_mbus_config,
>  };
>
>  static const struct v4l2_subdev_ops ov5640_subdev_ops = {
> --
> 2.36.1
>