[RFT PATCH v2 4/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7

[Krzysztof Kozlowski]

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'], ...
    should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 82fee1b7caab..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -690,7 +690,7 @@ usbdrd_phy: phy@15500000 {
 			#phy-cells = <1>;
 		};
 
-		usbdrd: usb {
+		usbdrd: usb@15400000 {
 			compatible = "samsung,exynos7-dwusb3";
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@ usbdrd: usb {
 				"usbdrd30_axius_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 
-			usb@15400000 {
+			usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1