Re: [PATCH] regmap: apply reg_base and reg_downshift for single register ops

[Colin Foster]

Hi Daniel,

On Sat, Jan 28, 2023 at 03:10:01AM +0000, Daniel Golle wrote:
> reg_base and reg_downshift currently don't have any effect if used with
> simple single register operations.
> 
> Fix that by taking them into account also for _reg_read, _reg_write and
> _reg_update_bits (they may still be missing also in other place, eg.
> page selection code).
> 
> Fixes: 0074f3f2b1e43d ("regmap: allow a defined reg_base to be added to every address")
> Fixes: 86fc59ef818beb ("regmap: add configurable downshift for addresses")
> Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
> ---
>  drivers/base/regmap/regmap.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
> index d12d669157f24..7b8386ec21b8c 100644
> --- a/drivers/base/regmap/regmap.c
> +++ b/drivers/base/regmap/regmap.c
> @@ -1986,6 +1986,8 @@ int _regmap_write(struct regmap *map, unsigned int reg,
>  		}
>  	}
>  
> +	reg += map->reg_base;
> +	reg >>= map->format.reg_downshift;
>  	ret = map->reg_write(context, reg, val);
>  	if (ret == 0) {
>  		if (regmap_should_log(map))
> @@ -2879,6 +2881,8 @@ static int _regmap_read(struct regmap *map, unsigned int reg,
>  	if (!regmap_readable(map, reg))
>  		return -EIO;
>  
> +	reg += map->reg_base;
> +	reg >>= map->format.reg_downshift;

Something more subtle is going on.

Here's a stack dump from a write and a read:

[    3.238249]  dump_backtrace from show_stack+0x20/0x24
[    3.243349]  r7:c3a27c00 r6:00000000 r5:c17aa2d8 r4:60000113
[    3.249034]  show_stack from dump_stack_lvl+0x60/0x78
[    3.254121]  dump_stack_lvl from dump_stack+0x18/0x1c
[    3.259208]  r7:c3a27c00 r6:c3a5a400 r5:00000007 r4:c1e64d5c
[    3.264892]  dump_stack from ocelot_spi_regmap_bus_write+0x9c/0xa8
[    3.271113]  ocelot_spi_regmap_bus_write from _regmap_raw_write_impl+0x60c/0x8b8
[    3.278555]  r7:00000000 r6:c3a5a403 r5:c1dfe160 r4:c3a1ba00
[    3.284239]  _regmap_raw_write_impl from _regmap_bus_raw_write+0x7c/0xa0
[    3.290982]  r10:df9bd164 r9:df9bd164 r8:c3a1ba00 r7:00000000 r6:00000000 r5:00000000
[    3.298847]  r4:c3a1ba00
[    3.301391]  _regmap_bus_raw_write from _regmap_write+0x64/0x174
[    3.307448]  r6:00000000 r5:00000000 r4:c3a1ba00
[    3.312085]  _regmap_write from regmap_write+0x4c/0x6c
[    3.317263]  r9:df9bd164 r8:c1d9e1e0 r7:00000000 r6:00000000 r5:00000000 r4:c3a1ba00
[    3.325040]  regmap_write from ocelot_spi_initialize+0x44/0xc0
[    3.330910]  r7:00000000 r6:c1da1904 r5:c3a58d40 r4:c3a58d40
[    3.336595]  ocelot_spi_initialize from ocelot_spi_probe+0x9c/0x178


[    3.753685]  dump_backtrace from show_stack+0x20/0x24
[    3.758777]  r7:00000004 r6:00000000 r5:c17aa2d8 r4:60000113
[    3.764462]  show_stack from dump_stack_lvl+0x60/0x78
[    3.769547]  dump_stack_lvl from dump_stack+0x18/0x1c
[    3.774633]  r7:00000004 r6:c3a5a403 r5:c1e64d5c r4:c3a27c00
[    3.780317]  dump_stack from ocelot_spi_regmap_bus_read+0x144/0x150
[    3.786623]  ocelot_spi_regmap_bus_read from _regmap_raw_read+0x114/0x2d4
[    3.793455]  r9:df9bd164 r8:c1dfe160 r7:c3a5a403 r6:00000004 r5:c3a1ba00 r4:c0a84140
[    3.801232]  _regmap_raw_read from _regmap_bus_read+0x54/0x80
[    3.807016]  r10:df9bd164 r9:df9bd164 r8:c1d9e1e0 r7:e0055ab8 r6:c3a5a403 r5:00000004
[    3.814881]  r4:c3a1ba00
[    3.817425]  _regmap_bus_read from _regmap_read+0x70/0x190
[    3.822952]  r7:e0055ab8 r6:c3a1ba00 r5:00000004 r4:c3a1ba00
[    3.828635]  _regmap_read from regmap_read+0x4c/0x6c
[    3.833642]  r10:df9bd164 r9:df9bd164 r8:c1d9e1e0 r7:00000000 r6:e0055ab8 r5:00000004
[    3.841508]  r4:c3a1ba00 r3:c21fc700
[    3.845098]  regmap_read from ocelot_spi_initialize+0xa0/0xc0
[    3.850886]  r7:00000000 r6:c1da1904 r5:c3a58d40 r4:00000001
[    3.856570]  ocelot_spi_initialize from ocelot_spi_probe+0x9c/0x178


So applying this in both _regmap_write and _regmap_raw_write_impl cause
the operations to happen twice. Similarly with _regmap_read and
_regmap_raw_read.

Rewinding my brain back a year - I also didn't want to tamper with the
reg value before any cache checks. Those operations are at the very end
of the processing chain. In my scenario, I'm getting a 4-byte register
at address 0x4. The fact that it needs to go out a SPI bus as 0x1
shouldn't change any other logic in the system.

And my other _main_ motivation was to use bus reads, so that bulk
transfers were possible. My initial implementations didn't use the bus
interface, so I did all address manipulation in my custom read / write
functions. Bulk transfers offered an order of magnitude improvement in
access time.


Perhaps there is some confusion due to my field description in
include/linux/regmap.h, and it should reference "any bus operation"? Or
something similar...


>  	ret = map->reg_read(context, reg, val);
>  	if (ret == 0) {
>  		if (regmap_should_log(map))
> @@ -3231,6 +3235,8 @@ static int _regmap_update_bits(struct regmap *map, unsigned int reg,
>  		*change = false;
>  
>  	if (regmap_volatile(map, reg) && map->reg_update_bits) {
> +		reg += map->reg_base;
> +		reg >>= map->format.reg_downshift;
>  		ret = map->reg_update_bits(map->bus_context, reg, mask, val);
>  		if (ret == 0 && change)
>  			*change = true;
> 
> base-commit: e2f86c02fdc96ca29ced53221a3cbf50aa6f8b49
> -- 
> 2.39.1
> 

Colin Foster