[PATCH 07/10] staging: rtl8192e: Remove unused constants in _RTL8192Pci_HW
From: Philipp Hortmann
Date: Sun Jan 29 2023 - 09:59:08 EST
Remove unused constants in and after _RTL8192Pci_HW of r8192E_hw.h. A
part of the constants would need to be renamed because of CamelCase on
others spaces are missing before and after "<<".
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
---
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 148 +-----------------
1 file changed, 1 insertion(+), 147 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h b/drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h
index cc1e62f7074d..13c0e5218ecf 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h
@@ -41,72 +41,39 @@ enum baseband_config {
#define EEPROM_CID_WHQL 0xFE
enum _RTL8192Pci_HW {
MAC0 = 0x000,
- MAC1 = 0x001,
- MAC2 = 0x002,
- MAC3 = 0x003,
MAC4 = 0x004,
- MAC5 = 0x005,
PCIF = 0x009,
-#define MXDMA2_16bytes 0x000
-#define MXDMA2_32bytes 0x001
-#define MXDMA2_64bytes 0x010
-#define MXDMA2_128bytes 0x011
-#define MXDMA2_256bytes 0x100
-#define MXDMA2_512bytes 0x101
-#define MXDMA2_1024bytes 0x110
#define MXDMA2_NoLimit 0x7
-#define MULRW_SHIFT 3
#define MXDMA2_RX_SHIFT 4
#define MXDMA2_TX_SHIFT 0
PMR = 0x00c,
EPROM_CMD = 0x00e,
-#define EPROM_CMD_RESERVED_MASK BIT5
+
#define EPROM_CMD_9356SEL BIT4
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
-#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
-#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
-#define EPROM_CMD_LOAD 1
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_BIT 3
#define EPROM_CK_BIT 2
#define EPROM_W_BIT 1
#define EPROM_R_BIT 0
- AFR = 0x010,
-#define AFR_CardBEn (1<<0)
-#define AFR_CLKRUN_SEL (1<<1)
-#define AFR_FuncRegEn (1<<2)
-
ANAPAR = 0x17,
#define BB_GLOBAL_RESET_BIT 0x1
BB_GLOBAL_RESET = 0x020,
BSSIDR = 0x02E,
CMDR = 0x037,
-#define CR_RST 0x10
#define CR_RE 0x08
#define CR_TE 0x04
-#define CR_MulRW 0x01
SIFS = 0x03E,
- TCR = 0x040,
RCR = 0x044,
-#define RCR_FILTER_MASK (BIT0 | BIT1 | BIT2 | BIT3 | BIT5 | BIT12 | \
- BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23)
#define RCR_ONLYERLPKT BIT31
-#define RCR_ENCS2 BIT30
-#define RCR_ENCS1 BIT29
-#define RCR_ENMBID BIT27
-#define RCR_ACKTXBW (BIT24|BIT25)
#define RCR_CBSSID BIT23
-#define RCR_APWRMGT BIT22
#define RCR_ADD3 BIT21
#define RCR_AMF BIT20
-#define RCR_ACF BIT19
#define RCR_ADF BIT18
-#define RCR_RXFTH BIT13
#define RCR_AICV BIT12
-#define RCR_ACRC32 BIT5
#define RCR_AB BIT3
#define RCR_AM BIT2
#define RCR_APM BIT1
@@ -115,8 +82,6 @@ enum _RTL8192Pci_HW {
#define RCR_FIFO_OFFSET 13
SLOT_TIME = 0x049,
ACK_TIMEOUT = 0x04c,
- PIFS_TIME = 0x04d,
- USTIME = 0x04e,
EDCAPARA_BE = 0x050,
EDCAPARA_BK = 0x054,
EDCAPARA_VO = 0x058,
@@ -125,53 +90,25 @@ enum _RTL8192Pci_HW {
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
- RFPC = 0x05F,
- CWRR = 0x060,
BCN_TCFG = 0x062,
#define BCN_TCFG_CW_SHIFT 8
#define BCN_TCFG_IFS 0
BCN_INTERVAL = 0x070,
ATIMWND = 0x072,
BCN_DRV_EARLY_INT = 0x074,
-#define BCN_DRV_EARLY_INT_SWBCN_SHIFT 8
-#define BCN_DRV_EARLY_INT_TIME_SHIFT 0
BCN_DMATIME = 0x076,
BCN_ERR_THRESH = 0x078,
RWCAM = 0x0A0,
-#define CAM_CM_SecCAMPolling BIT31
-#define CAM_CM_SecCAMClr BIT30
-#define CAM_CM_SecCAMWE BIT16
-#define CAM_VALID BIT15
-#define CAM_NOTVALID 0x0000
-#define CAM_USEDK BIT5
-
-#define CAM_NONE 0x0
-#define CAM_WEP40 0x01
-#define CAM_TKIP 0x02
-#define CAM_AES 0x04
-#define CAM_WEP104 0x05
-
#define TOTAL_CAM_ENTRY 32
-
-#define CAM_CONFIG_USEDK true
-#define CAM_CONFIG_NO_USEDK false
-#define CAM_WRITE BIT16
-#define CAM_READ 0x00000000
-#define CAM_POLLINIG BIT31
-#define SCR_UseDK 0x01
WCAMI = 0x0A4,
- RCAMO = 0x0A8,
SECR = 0x0B0,
#define SCR_TxUseDK BIT0
#define SCR_RxUseDK BIT1
#define SCR_TxEncEnable BIT2
#define SCR_RxDecEnable BIT3
-#define SCR_SKByA2 BIT4
#define SCR_NoSKMC BIT5
SWREGULATOR = 0x0BD,
INTA_MASK = 0x0f4,
-#define IMR8190_DISABLED 0x0
-#define IMR_ATIMEND BIT28
#define IMR_TBDOK BIT27
#define IMR_TBDER BIT26
#define IMR_TXFOVW BIT15
@@ -192,29 +129,9 @@ enum _RTL8192Pci_HW {
#define IMR_ROK BIT0
ISR = 0x0f8,
TPPoll = 0x0fd,
-#define TPPoll_BKQ BIT0
-#define TPPoll_BEQ BIT1
-#define TPPoll_VIQ BIT2
-#define TPPoll_VOQ BIT3
-#define TPPoll_BQ BIT4
#define TPPoll_CQ BIT5
-#define TPPoll_MQ BIT6
-#define TPPoll_HQ BIT7
-#define TPPoll_HCCAQ BIT8
-#define TPPoll_StopBK BIT9
-#define TPPoll_StopBE BIT10
-#define TPPoll_StopVI BIT11
-#define TPPoll_StopVO BIT12
-#define TPPoll_StopMgt BIT13
-#define TPPoll_StopHigh BIT14
-#define TPPoll_StopHCCA BIT15
-#define TPPoll_SHIFT 8
-
PSR = 0x0ff,
-#define PSR_GEN 0x0
-#define PSR_CPU 0x1
CPU_GEN = 0x100,
- BB_RESET = 0x101,
#define CPU_CCK_LOOPBACK 0x00030000
#define CPU_GEN_SYSTEM_RESET 0x00000001
#define CPU_GEN_FIRMWARE_RESET 0x00000008
@@ -225,31 +142,13 @@ enum _RTL8192Pci_HW {
#define CPU_GEN_PWR_STB_CPU 0x00000004
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000
-#define CPU_GEN_GPIO_UART 0x00007000
-
- LED1Cfg = 0x154,
- LED0Cfg = 0x155,
-
- AcmAvg = 0x170,
AcmHwCtrl = 0x171,
-#define AcmHw_HwEn BIT0
#define AcmHw_BeqEn BIT1
#define AcmHw_ViqEn BIT2
#define AcmHw_VoqEn BIT3
-#define AcmHw_BeqStatus BIT4
-#define AcmHw_ViqStatus BIT5
-#define AcmHw_VoqStatus BIT6
- AcmFwCtrl = 0x172,
-#define AcmFw_BeqStatus BIT0
-#define AcmFw_ViqStatus BIT1
-#define AcmFw_VoqStatus BIT2
- VOAdmTime = 0x174,
- VIAdmTime = 0x178,
- BEAdmTime = 0x17C,
RQPN1 = 0x180,
RQPN2 = 0x184,
RQPN3 = 0x188,
- QPRR = 0x1E0,
QPNR = 0x1F0,
BQDA = 0x200,
HQDA = 0x204,
@@ -260,40 +159,13 @@ enum _RTL8192Pci_HW {
VIQDA = 0x218,
BEQDA = 0x21C,
BKQDA = 0x220,
- RCQDA = 0x224,
RDQDA = 0x228,
- MAR0 = 0x240,
- MAR4 = 0x244,
-
- CCX_PERIOD = 0x250,
- CLM_RESULT = 0x251,
- NHM_PERIOD = 0x252,
-
- NHM_THRESHOLD0 = 0x253,
- NHM_THRESHOLD1 = 0x254,
- NHM_THRESHOLD2 = 0x255,
- NHM_THRESHOLD3 = 0x256,
- NHM_THRESHOLD4 = 0x257,
- NHM_THRESHOLD5 = 0x258,
- NHM_THRESHOLD6 = 0x259,
-
- MCTRL = 0x25A,
-
- NHM_RPI_COUNTER0 = 0x264,
- NHM_RPI_COUNTER1 = 0x265,
- NHM_RPI_COUNTER2 = 0x266,
- NHM_RPI_COUNTER3 = 0x267,
- NHM_RPI_COUNTER4 = 0x268,
- NHM_RPI_COUNTER5 = 0x269,
- NHM_RPI_COUNTER6 = 0x26A,
- NHM_RPI_COUNTER7 = 0x26B,
WFCRC0 = 0x2f0,
WFCRC1 = 0x2f4,
WFCRC2 = 0x2f8,
BW_OPMODE = 0x300,
-#define BW_OPMODE_11J BIT0
#define BW_OPMODE_5G BIT1
#define BW_OPMODE_20MHZ BIT2
IC_VERRSION = 0x301,
@@ -304,7 +176,6 @@ enum _RTL8192Pci_HW {
#define MSR_LINK_SHIFT 0
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
-#define MSR_LINK_ENEDCA (1<<4)
#define MSR_NOLINK 0x00
#define MSR_ADHOC 0x01
@@ -316,12 +187,7 @@ enum _RTL8192Pci_HW {
#define RETRY_LIMIT_LONG_SHIFT 0
TSFR = 0x308,
RRSR = 0x310,
-#define RRSR_RSC_OFFSET 21
#define RRSR_SHORT_OFFSET 23
-#define RRSR_RSC_DUPLICATE 0x600000
-#define RRSR_RSC_UPSUBCHNL 0x400000
-#define RRSR_RSC_LOWSUBCHNL 0x200000
-#define RRSR_SHORT 0x800000
#define RRSR_1M BIT0
#define RRSR_2M BIT1
#define RRSR_5_5M BIT2
@@ -334,14 +200,6 @@ enum _RTL8192Pci_HW {
#define RRSR_36M BIT9
#define RRSR_48M BIT10
#define RRSR_54M BIT11
-#define RRSR_MCS0 BIT12
-#define RRSR_MCS1 BIT13
-#define RRSR_MCS2 BIT14
-#define RRSR_MCS3 BIT15
-#define RRSR_MCS4 BIT16
-#define RRSR_MCS5 BIT17
-#define RRSR_MCS6 BIT18
-#define RRSR_MCS7 BIT19
#define BRSR_AckShortPmb BIT23
UFWP = 0x318,
RATR0 = 0x320,
@@ -393,10 +251,6 @@ enum _RTL8192Pci_HW {
;
#define GPI 0x108
-#define GPO 0x109
-#define GPE 0x10a
-
-#define HWSET_MAX_SIZE_92S 128
#define ANAPAR_FOR_8192PciE 0x17
--
2.39.1