[PATCH v7 2/5] dt-bindings: imx6q-pcie: Add schema for i.MX8M PCIe Endpoint modes
From: Richard Zhu
Date: Sun Jan 29 2023 - 22:57:50 EST
Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
accordingly.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
---
.../bindings/pci/fsl,imx6q-pcie-ep.yaml | 317 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 318 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
new file mode 100644
index 000000000000..7c594ae53067
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe Endpoint controller
+
+maintainers:
+ - Lucas Stach <l.stach@xxxxxxxxxxxxxx>
+ - Richard Zhu <hongxing.zhu@xxxxxxx>
+
+description: |+
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP and
+ thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+ The controller instances are dual mode where in they can work either in
+ Root Port mode or Endpoint mode but one at a time.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ - fsl,imx8mp-pcie-ep
+
+ reg:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: addr_space
+
+ interrupts:
+ items:
+ - description: builtin eDMA interrupter.
+
+ interrupt-names:
+ items:
+ - const: dma
+
+ clocks:
+ minItems: 3
+ items:
+ - description: PCIe bridge clock.
+ - description: PCIe bus clock.
+ - description: PCIe PHY clock.
+ - description: Additional required clock entry for imx6sx-pcie-ep,
+ imx8mq-pcie-ep.
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - enum: [ pcie_phy, pcie_aux ]
+ - enum: [ pcie_inbound_axi, pcie_aux ]
+
+ num-lanes:
+ const: 1
+
+ fsl,imx7d-pcie-phy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+ required properties for imx7d-pcie-ep and imx8mq-pcie-ep.
+
+ power-domains:
+ minItems: 1
+ items:
+ - description: The phandle pointing to the DISPLAY domain for
+ imx6sx-pcie-ep, to PCIE_PHY power domain for imx7d-pcie-ep and
+ imx8mq-pcie-ep.
+ - description: The phandle pointing to the PCIE_PHY power domains
+ for imx6sx-pcie-ep.
+
+ power-domain-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: pcie_phy
+
+ resets:
+ minItems: 2
+ maxItems: 3
+ description: Phandles to PCIe-related reset lines exposed by SRC
+ IP block. Additional required by imx7d-pcie-ep and imx8mq-pcie-ep.
+
+ reset-names:
+ minItems: 2
+ maxItems: 3
+
+ fsl,tx-deemph-gen1:
+ description: Gen1 De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,tx-deemph-gen2-3p5db:
+ description: Gen2 (3.5db) De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,tx-deemph-gen2-6db:
+ description: Gen2 (6db) De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 20
+
+ fsl,tx-swing-full:
+ description: Gen2 TX SWING FULL value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 127
+
+ fsl,tx-swing-low:
+ description: TX launch amplitude swing_low value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 127
+
+ fsl,max-link-speed:
+ description: Specify PCI Gen for link capability (optional required).
+ Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+ requirements and thus for gen2 capability a gen2 compliant clock
+ generator should be used and configured.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3, 4]
+ default: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ vpcie-supply:
+ description: Should specify the regulator in charge of PCIe port power.
+ The regulator will be enabled when initializing the PCIe host and
+ disabled either as part of the init process or when shutting down
+ the host (optional required).
+
+ vph-supply:
+ description: Should specify the regulator in charge of VPH one of
+ the three PCIe PHY powers. This regulator can be supplied by both
+ 1.8v and 3.3v voltage supplies (optional required).
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - num-lanes
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx6sx-pcie-ep
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - const: pcie_phy
+ - const: pcie_inbound_axi
+ power-domains:
+ minItems: 2
+ power-domain-names:
+ minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - const: pcie_phy
+ - const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ - fsl,imx7d-pcie-ep
+ then:
+ properties:
+ clock-names:
+ maxItems: 3
+ contains:
+ const: pcie_phy
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mm-pcie-ep
+ - fsl,imx8mp-pcie-ep
+ then:
+ properties:
+ clock-names:
+ maxItems: 3
+ contains:
+ const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ then:
+ properties:
+ power-domains: false
+ power-domain-names: false
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ then:
+ properties:
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ - fsl,imx7d-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ resets:
+ minItems: 3
+ reset-names:
+ items:
+ - const: pciephy
+ - const: apps
+ - const: turnoff
+ else:
+ properties:
+ resets:
+ maxItems: 2
+ reset-names:
+ items:
+ - const: apps
+ - const: turnoff
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+ #include <dt-bindings/reset/imx8mp-reset.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie_ep: pcie-ep@33800000 {
+ compatible = "fsl,imx8mp-pcie-ep";
+ reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+ reg-names = "dbi", "addr_space";
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>;
+ clock-names = "pcie", "pcie_bus", "pcie_aux";
+ assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-rates = <10000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+ interrupt-names = "dma";
+ fsl,max-link-speed = <3>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+ resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "apps", "turnoff";
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ num-ib-windows = <4>;
+ num-ob-windows = <4>;
+ status = "disabled";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dce1c45f4d1..663a0d5960d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15997,6 +15997,7 @@ M: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
L: linux-pci@xxxxxxxxxxxxxxx
L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
S: Maintained
+F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
F: drivers/pci/controller/dwc/*imx6*
--
2.34.1