[PATCH net-next v3 15/15] net: fec: add support for PHYs with SmartEEE support

[Oleksij Rempel]

Ethernet controller in i.MX6*/i.MX7* series do not provide EEE support.
But this chips are used sometimes in combinations with SmartEEE capable
PHYs.
So, instead of aborting get/set_eee access on MACs without EEE support,
ask PHY if it is able to do the EEE job by using SmartEEE.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
 drivers/net/ethernet/freescale/fec_main.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index e6238e53940d..25a2a9d860de 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3102,8 +3102,15 @@ fec_enet_get_eee(struct net_device *ndev, struct ethtool_eee *edata)
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	struct ethtool_eee *p = &fep->eee;
 
-	if (!(fep->quirks & FEC_QUIRK_HAS_EEE))
-		return -EOPNOTSUPP;
+	if (!(fep->quirks & FEC_QUIRK_HAS_EEE)) {
+		if (!netif_running(ndev))
+			return -ENETDOWN;
+
+		if (!phy_has_smarteee(ndev->phydev))
+			return -EOPNOTSUPP;
+
+		return phy_ethtool_get_eee(ndev->phydev, edata);
+	}
 
 	if (!netif_running(ndev))
 		return -ENETDOWN;
@@ -3123,8 +3130,15 @@ fec_enet_set_eee(struct net_device *ndev, struct ethtool_eee *edata)
 	struct ethtool_eee *p = &fep->eee;
 	int ret = 0;
 
-	if (!(fep->quirks & FEC_QUIRK_HAS_EEE))
-		return -EOPNOTSUPP;
+	if (!(fep->quirks & FEC_QUIRK_HAS_EEE)) {
+		if (!netif_running(ndev))
+			return -ENETDOWN;
+
+		if (!phy_has_smarteee(ndev->phydev))
+			return -EOPNOTSUPP;
+
+		return phy_ethtool_set_eee(ndev->phydev, edata);
+	}
 
 	if (!netif_running(ndev))
 		return -ENETDOWN;
-- 
2.30.2