Re: [PATCH net-next v3 1/5] dt-bindings: net: Add Motorcomm yt8xxx ethernet phy

[Andrew Lunn]

On Mon, Jan 30, 2023 at 02:35:35PM +0800, Frank Sae wrote:
>  Add a YAML binding document for the Motorcom yt8xxx Ethernet phy driver.
>  
> Signed-off-by: Frank Sae <Frank.Sae@xxxxxxxxxxxxxx>
> ---
>  .../bindings/net/motorcomm,yt8xxx.yaml        | 102 ++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  MAINTAINERS                                   |   1 +
>  3 files changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> new file mode 100644
> index 000000000000..8527576c15b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MotorComm yt8xxx Ethernet PHY
> +
> +maintainers:
> +  - frank sae <frank.sae@xxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +properties:
> +  rx-internal-delay-ps:
> +    description: |
> +      RGMII RX Clock Delay used only when PHY operates in RGMII mode with
> +      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
> +    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650,
> +            1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800,
> +            2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ]
> +    default: 1950

Ah! There has been a misunderstand. Yes, this changes does make sense, but ....

> +
> +  tx-internal-delay-ps:
> +    description: |
> +      RGMII TX Clock Delay used only when PHY operates in RGMII mode with
> +      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
> +    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800,
> +            1950, 2100, 2250 ]
> +    default: 150

... i was actually trying to say this 150 is odd. Why is this not
1950?

	Andrew