Re: [PATCH net-next v3 05/15] net: phy: add genphy_c45_ethtool_get/set_eee() support
From: Andrew Lunn
Date: Mon Jan 30 2023 - 17:06:40 EST
> +/**
> + * genphy_c45_write_eee_adv - read advertised EEE link modes
s/read/write
> + * @phydev: target phy_device struct
> + */
> +int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
> + int val, changed;
> +
> + linkmode_and(common, phydev->supported_eee, PHY_EEE_100_10000_FEATURES);
> + if (!linkmode_empty(common)) {
> + val = linkmode_adv_to_mii_eee_100_10000_adv_t(adv);
> +
> + /* In eee_broken_modes are stored MDIO_AN_EEE_ADV specific raw
> + * register values.
> + */
> + val &= ~phydev->eee_broken_modes;
> +
> + val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
> + MDIO_AN_EEE_ADV,
> + MDIO_EEE_100TX | MDIO_EEE_1000T |
> + MDIO_EEE_10GT | MDIO_EEE_1000KX |
> + MDIO_EEE_10GKX4 | MDIO_EEE_10GKR,
> + val);
> + if (val < 0)
> + return val;
> + if (val > 0)
> + changed = 1;
> + }
> +
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
> + phydev->supported_eee)) {
> + val = linkmode_adv_to_mii_10base_t1_t(adv);
> +
> + val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
> + MDIO_AN_10BT1_AN_CTRL,
> + MDIO_AN_10BT1_AN_CTRL_ADV_EEE_T1L,
> + val);
> + if (val < 0)
> + return val;
> + if (val > 0)
> + changed = 1;
> + }
> +
> + return changed;
> +}
> +
> +/**
> + * genphy_c45_read_eee_adv - read advertised EEE link modes
> + * @phydev: target phy_device struct
> + */
> +static int genphy_c45_read_eee_adv(struct phy_device *phydev,
> + unsigned long *adv)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
> + int val;
> +
> + linkmode_and(common, phydev->supported_eee, PHY_EEE_100_10000_FEATURES);
> + if (!linkmode_empty(common)) {
> + /* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1
> + * (Register 7.60)
> + */
> + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
> + if (val < 0)
> + return val;
> +
> + mii_eee_100_10000_adv_mod_linkmode_t(adv, val);
> + }
> +
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
> + phydev->supported_eee)) {
> + /* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
> + * (Register 7.526)
> + */
> + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_CTRL);
> + if (val < 0)
> + return val;
> +
> + mii_10base_t1_adv_mod_linkmode_t(adv, val);
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * genphy_c45_read_eee_lpa - read advertised LP EEE link modes
> + * @phydev: target phy_device struct
> + */
> +static int genphy_c45_read_eee_lpa(struct phy_device *phydev,
> + unsigned long *lpa)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
> + int val;
> +
> + linkmode_and(common, phydev->supported_eee, PHY_EEE_100_10000_FEATURES);
> + if (!linkmode_empty(common)) {
> + /* IEEE 802.3-2018 45.2.7.14 EEE link partner ability 1
> + * (Register 7.61)
> + */
> + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
> + if (val < 0)
> + return val;
> +
> + mii_eee_100_10000_adv_mod_linkmode_t(lpa, val);
> + }
> +
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
> + phydev->supported_eee)) {
> + /* IEEE 802.3cg-2019 45.2.7.26 10BASE-T1 AN status register
> + * (Register 7.527)
> + */
> + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_STAT);
> + if (val < 0)
> + return val;
> +
> + mii_10base_t1_adv_mod_linkmode_t(lpa, val);
> + }
> +
> + return 0;
> +}
> +
> /**
> * genphy_c45_read_eee_abilities - read supported EEE link modes
> * @phydev: target phy_device struct
> @@ -1173,6 +1294,80 @@ int genphy_c45_plca_get_status(struct phy_device *phydev,
> }
> EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status);
>
> +/**
> + * genphy_c45_ethtool_get_eee - get EEE supported and status
> + * @phydev: target phy_device struct
> + * @data: ethtool_eee data
> + *
> + * Description: it reportes the Supported/Advertisement/LP Advertisement
> + * capabilities.
> + */
> +int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
> + struct ethtool_eee *data)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {};
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(lp) = {};
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
> + int ret;
> +
> + ret = genphy_c45_read_eee_adv(phydev, adv);
> + if (ret)
> + return ret;
> +
> + ret = genphy_c45_read_eee_lpa(phydev, lp);
> + if (ret)
> + return ret;
> +
> + data->eee_enabled = !linkmode_empty(adv);
> + linkmode_and(common, adv, lp);
> + if (data->eee_enabled && !linkmode_empty(common))
> + data->eee_active = phy_check_valid(phydev->speed,
> + phydev->duplex, common);
> + else
> + data->eee_active = false;
> +
> + /* FIXME: EEE ethtool interface currently do not support full set of
> + * possible EEE link modes.
> + */
> + data->supported = phydev->supported_eee[0];
> + data->advertised = adv[0];
> + data->lp_advertised = lp[0];
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
> +
> +/**
> + * genphy_c45_ethtool_set_eee - get EEE supported and status
> + * @phydev: target phy_device struct
> + * @data: ethtool_eee data
> + *
> + * Description: it reportes the Supported/Advertisement/LP Advertisement
> + * capabilities.
> + */
> +int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
> + struct ethtool_eee *data)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {};
> + int ret;
> +
> + if (data->eee_enabled) {
> + if (data->advertised)
> + adv[0] = data->advertised;
> + else
> + linkmode_copy(adv, phydev->supported_eee);
> + }
> +
> + ret = genphy_c45_write_eee_adv(phydev, adv);
> + if (ret < 0)
> + return ret;
> + if (ret > 0)
> + return phy_restart_aneg(phydev);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
> +
> struct phy_driver genphy_c45_driver = {
> .phy_id = 0xffffffff,
> .phy_id_mask = 0xffffffff,
> diff --git a/include/linux/mdio.h b/include/linux/mdio.h
> index ea4f7d08d1a6..231cf02671a7 100644
> --- a/include/linux/mdio.h
> +++ b/include/linux/mdio.h
> @@ -427,6 +427,42 @@ static inline void mii_eee_100_10000_adv_mod_linkmode_t(unsigned long *adv,
> adv, val & MDIO_EEE_10GKR);
> }
>
> +static inline u32 linkmode_adv_to_mii_eee_100_10000_adv_t(unsigned long *adv)
> +{
> + u32 result = 0;
> +
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, adv))
> + result |= MDIO_EEE_100TX;
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, adv))
> + result |= MDIO_EEE_1000T;
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, adv))
> + result |= MDIO_EEE_10GT;
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, adv))
> + result |= MDIO_EEE_1000KX;
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, adv))
> + result |= MDIO_EEE_10GKX4;
> + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, adv))
> + result |= MDIO_EEE_10GKR;
> +
> + return result;
Please could you remove the duplication with ethtool_adv_to_mmd_eee_adv_t().
Andrew