Re: [PATCH 3/6] regulator: qcom_smd: Add MP5496 regulators

[Devi Priya]

On 1/27/2023 9:33 PM, Konrad Dybcio wrote:
> On 27.01.2023 17:01, Devi Priya wrote:
> > On 1/13/2023 8:54 PM, Konrad Dybcio wrote:
> > > On 13.01.2023 16:03, devi priya wrote:
> > > > Adding support for PMIC MP5496 on IPQ9574 SoC
> > > >
> > > > Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > > > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > > > Signed-off-by: devi priya <quic_devipriy@xxxxxxxxxxx>
> > > > ---
> > > Please simply extend the existing MP5496 support with this
> > > S1 regulator. If you don't explicitly define and set voltages
> > > for the other vregs, they will not be probed.
> > >
> > > Konrad
> > IPQ6018 and IPQ9574 platforms use the same PMIC MP5496 but they have a different power layout. IPQ9574 has S2 regulator which will be used for NSS scaling but S2 in IPQ6018 serves a different purpose. Hence it would not be possible to extend the existing MP5496 support for IPQ9574
> Does the s2 on IPQ9574 have a different voltage range than
> the one on IPQ6018? No? Then there's nothing blocking you
> from using the setup for both SoCs. As I've mentioned,
> regulators that you don't add to the device tree will
> not even be probed.
Yeah, understood! will update this in V2
> Konrad
> > > >    drivers/regulator/qcom_smd-regulator.c | 16 ++++++++++++++++
> > > >    1 file changed, 16 insertions(+)
> > > >
> > > > diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> > > > index 9f2b58458841..1eb17d378897 100644
> > > > --- a/drivers/regulator/qcom_smd-regulator.c
> > > > +++ b/drivers/regulator/qcom_smd-regulator.c
> > > > @@ -767,6 +767,15 @@ static const struct regulator_desc mp5496_ldoa2 = {
> > > >        .ops = &rpm_mp5496_ops,
> > > >    };
> > > >    +static const struct regulator_desc ipq9574_mp5496_smpa1 = {
> > > > +    .linear_ranges = (struct linear_range[]) {
> > > > +        REGULATOR_LINEAR_RANGE(600000, 0, 37, 12500),
> > > > +    },
> > > > +    .n_linear_ranges = 1,
> > > > +    .n_voltages = 38,
> > > > +    .ops = &rpm_mp5496_ops,
> > > > +};
> > > > +
> > > >    static const struct regulator_desc pm2250_lvftsmps = {
> > > >        .linear_ranges = (struct linear_range[]) {
> > > >            REGULATOR_LINEAR_RANGE(320000, 0, 269, 4000),
> > > > @@ -799,6 +808,11 @@ static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
> > > >        {}
> > > >    };
> > > >    +static const struct rpm_regulator_data rpm_ipq9574_mp5496_regulators[] = {
> > > > +    { "s1", QCOM_SMD_RPM_SMPA, 1, &ipq9574_mp5496_smpa1, "s1" },
> > > > +    {}
> > > > +};
> > > > +
> > > >    static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
> > > >        { "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
> > > >        { "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
> > > > @@ -1320,6 +1334,8 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
> > > >    };
> > > >      static const struct of_device_id rpm_of_match[] = {
> > > > +    { .compatible = "qcom,rpm-ipq9574-mp5496-regulators",
> > > > +        .data = &rpm_ipq9574_mp5496_regulators },
> > > >        { .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
> > > >        { .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
> > > >        { .compatible = "qcom,rpm-pm6125-regulators", .data = &rpm_pm6125_regulators },
> > Best Regards,
> > Devi Priya
Best Regards,
Devi Priya