Re: [PATCH v4 8/8] clk: qcom: Add GPU clock controller driver for SM6115
From: Konrad Dybcio
Date: Tue Jan 31 2023 - 07:38:44 EST
On 31.01.2023 10:25, Dmitry Baryshkov wrote:
> On 31/01/2023 01:59, Konrad Dybcio wrote:
>> Add support for the GPU clock controller found on SM6115.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>> drivers/clk/qcom/Kconfig | 9 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/gpucc-sm6115.c | 512 ++++++++++++++++++++++++++++++++
>> 3 files changed, 522 insertions(+)
>> create mode 100644 drivers/clk/qcom/gpucc-sm6115.c
>
> [skipped]
>
>> +static int gpu_cc_sm6115_probe(struct platform_device *pdev)
>> +{
>> + struct regmap *regmap;
>> + unsigned int value, mask;
>> +
>> + regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
>> + clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
>> +
>> + /* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
>> + mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
>> + mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
>> + value = 0xf << CX_GMU_CBCR_WAKE_SHIFT | 0xf << CX_GMU_CBCR_SLEEP_SHIFT;
>> + regmap_update_bits(regmap, gpu_cc_cx_gmu_clk.clkr.enable_reg, mask, value);
>> +
>> + /* Set up PERIPH/MEM retain on the GPU core clock */
>> + regmap_update_bits(regmap, gpu_cc_gx_gfx3d_clk.halt_reg,
>> + (BIT(14) | BIT(13)), (BIT(14) | BIT(13)));
>
> But you have your new helpers to set these values, don't you?
Welp, that's what I get for managing 3 almost-identical drivers
at once ;) Will fix.
Konrad
>
>> +
>> + return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
>> +}
>> +
>> +static struct platform_driver gpu_cc_sm6115_driver = {
>> + .probe = gpu_cc_sm6115_probe,
>> + .driver = {
>> + .name = "sm6115-gpucc",
>> + .of_match_table = gpu_cc_sm6115_match_table,
>> + },
>> +};
>> +module_platform_driver(gpu_cc_sm6115_driver);
>> +
>> +MODULE_DESCRIPTION("QTI GPU_CC SM6115 Driver");
>> +MODULE_LICENSE("GPL");
>