[PATCH AUTOSEL 4.19 3/4] i2c: rk3x: fix a bunch of kernel-doc warnings

[Sasha Levin]

From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

[ Upstream commit 0582d984793d30442da88fe458674502bad1ad29 ]

Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:

drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line:
 * struct i2c_spec_values:
drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line:
 * struct rk3x_i2c_calced_timings:
drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line:
 * struct rk3x_i2c_soc_data:
drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Generate a START condition, which triggers a REG_INT_START interrupt.
drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead
drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead
drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Get timing values of I2C specification
drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Calculate divider values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Calculate timing values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Setup I2C registers for an I2C operation specified by msgs, num.

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rk3x.c | 44 +++++++++++++++++------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index e76ad020a542..61ab462fd94c 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -82,7 +82,7 @@ enum {
 #define DEFAULT_SCL_RATE  (100 * 1000) /* Hz */
 
 /**
- * struct i2c_spec_values:
+ * struct i2c_spec_values - I2C specification values for various modes
  * @min_hold_start_ns: min hold time (repeated) START condition
  * @min_low_ns: min LOW period of the SCL clock
  * @min_high_ns: min HIGH period of the SCL cloc
@@ -138,7 +138,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = {
 };
 
 /**
- * struct rk3x_i2c_calced_timings:
+ * struct rk3x_i2c_calced_timings - calculated V1 timings
  * @div_low: Divider output for low
  * @div_high: Divider output for high
  * @tuning: Used to adjust setup/hold data time,
@@ -161,7 +161,7 @@ enum rk3x_i2c_state {
 };
 
 /**
- * struct rk3x_i2c_soc_data:
+ * struct rk3x_i2c_soc_data - SOC-specific data
  * @grf_offset: offset inside the grf regmap for setting the i2c type
  * @calc_timings: Callback function for i2c timing information calculated
  */
@@ -241,7 +241,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
 }
 
 /**
- * Generate a START condition, which triggers a REG_INT_START interrupt.
+ * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt.
+ * @i2c: target controller data
  */
 static void rk3x_i2c_start(struct rk3x_i2c *i2c)
 {
@@ -260,8 +261,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c)
 }
 
 /**
- * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
- *
+ * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
+ * @i2c: target controller data
  * @error: Error code to return in rk3x_i2c_xfer
  */
 static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
@@ -300,7 +301,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
 }
 
 /**
- * Setup a read according to i2c->msg
+ * rk3x_i2c_prepare_read - Setup a read according to i2c->msg
+ * @i2c: target controller data
  */
 static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
 {
@@ -331,7 +333,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
 }
 
 /**
- * Fill the transmit buffer with data from i2c->msg
+ * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg
+ * @i2c: target controller data
  */
 static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c)
 {
@@ -534,11 +537,10 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
 }
 
 /**
- * Get timing values of I2C specification
- *
+ * rk3x_i2c_get_spec - Get timing values of I2C specification
  * @speed: Desired SCL frequency
  *
- * Returns: Matched i2c spec values.
+ * Return: Matched i2c_spec_values.
  */
 static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 {
@@ -551,13 +553,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 }
 
 /**
- * Calculate divider values for desired SCL frequency
- *
+ * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency
  * @clk_rate: I2C input clock rate
  * @t: Known I2C timing information
  * @t_calc: Caculated rk3x private timings that would be written into regs
  *
- * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case
  * a best-effort divider value is returned in divs. If the target rate is
  * too high, we silently use the highest possible rate.
  */
@@ -712,13 +713,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 }
 
 /**
- * Calculate timing values for desired SCL frequency
- *
+ * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency
  * @clk_rate: I2C input clock rate
  * @t: Known I2C timing information
  * @t_calc: Caculated rk3x private timings that would be written into regs
  *
- * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case
  * a best-effort divider value is returned in divs. If the target rate is
  * too high, we silently use the highest possible rate.
  * The following formulas are v1's method to calculate timings.
@@ -962,14 +962,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
 }
 
 /**
- * Setup I2C registers for an I2C operation specified by msgs, num.
- *
- * Must be called with i2c->lock held.
- *
+ * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num.
+ * @i2c: target controller data
  * @msgs: I2C msgs to process
  * @num: Number of msgs
  *
- * returns: Number of I2C msgs processed or negative in case of error
+ * Must be called with i2c->lock held.
+ *
+ * Return: Number of I2C msgs processed or negative in case of error
  */
 static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
 {
-- 
2.39.0