[PATCH v11 2/5] media: i2c: imx334: add missing reset values for mode 3840x2160_regs[]

[shravan kumar]

From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>

There are some missing reset reg_mode values for the 3840x2160@60
resolution. The camera sensor still works in 3840x2160@60 resolution mode
because of the register reset values. This is an issue when we change the
modes dynamically. As an example, when we change the mode from 1920x1080@30
 resolution to 3840x2160@60 resoultion then the mode values will be written
to the registers from the array mode_3840x2160_regs[] which gives the wrong
output which is incorrect resolution.

So add the missing reset values to the mode_3840x2160_regs[].

Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
---
 drivers/media/i2c/imx334.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index ebacba3059b3..40ece08f20f5 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -166,6 +166,7 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
 	{0x3288, 0x21},
 	{0x328a, 0x02},
 	{0x302c, 0x3c},
+	{0x302d, 0x00},
 	{0x302e, 0x00},
 	{0x302f, 0x0f},
 	{0x3076, 0x70},
@@ -240,7 +241,26 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
 	{0x3794, 0x7a},
 	{0x3796, 0xa1},
 	{0x3e04, 0x0e},
+	{0x319e, 0x00},
 	{0x3a00, 0x01},
+	{0x3a18, 0xbf},
+	{0x3a19, 0x00},
+	{0x3a1a, 0x67},
+	{0x3a1b, 0x00},
+	{0x3a1c, 0x6f},
+	{0x3a1d, 0x00},
+	{0x3a1e, 0xd7},
+	{0x3a1f, 0x01},
+	{0x3a20, 0x6f},
+	{0x3a21, 0x00},
+	{0x3a22, 0xcf},
+	{0x3a23, 0x00},
+	{0x3a24, 0x6f},
+	{0x3a25, 0x00},
+	{0x3a26, 0xb7},
+	{0x3a27, 0x00},
+	{0x3a28, 0x5f},
+	{0x3a29, 0x00},
 };
 
 /* Supported sensor mode configurations */
-- 
2.34.1