Re: [PATCH V2 3/5] clk: qcom: apss-ipq-pll: add support for IPQ5332

[Konrad Dybcio]

On 8.02.2023 05:28, Kathiravan T wrote:
> IPQ5332 APSS PLL is of type Stromer Plus. Add support for the same.
> 
> To configure the stromer plus PLL separate API
> (clock_stromer_pll_configure) to be used. To achieve this, introduce the
> new member pll_type in device data structure and call the appropriate
> function based on this.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> Changes in V2:
> 	- No changes
> 
>  drivers/clk/qcom/apss-ipq-pll.c | 58 ++++++++++++++++++++++++++++++++-
>  1 file changed, 57 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> index 4f2a147e9fb2..cf4f0d340cbf 100644
> --- a/drivers/clk/qcom/apss-ipq-pll.c
> +++ b/drivers/clk/qcom/apss-ipq-pll.c
> @@ -24,6 +24,17 @@ static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
>  		[PLL_OFF_TEST_CTL] = 0x30,
>  		[PLL_OFF_TEST_CTL_U] = 0x34,
>  	},
> +	[CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
> +		[PLL_OFF_L_VAL] = 0x08,
> +		[PLL_OFF_ALPHA_VAL] = 0x10,
> +		[PLL_OFF_ALPHA_VAL_U] = 0x14,
> +		[PLL_OFF_USER_CTL] = 0x18,
> +		[PLL_OFF_USER_CTL_U] = 0x1c,
> +		[PLL_OFF_CONFIG_CTL] = 0x20,
> +		[PLL_OFF_STATUS] = 0x28,
> +		[PLL_OFF_TEST_CTL] = 0x30,
> +		[PLL_OFF_TEST_CTL_U] = 0x34,
> +	},
>  };
>  
>  static struct clk_alpha_pll ipq_pll_huayra = {
> @@ -44,6 +55,38 @@ static struct clk_alpha_pll ipq_pll_huayra = {
>  	},
>  };
>  
> +static struct clk_alpha_pll ipq_pll_stromer_plus = {
> +	.offset = 0x0,
> +	.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
> +	.flags = SUPPORTS_DYNAMIC_UPDATE,
> +	.clkr = {
> +		.enable_reg = 0x0,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "a53pll",
> +			.parent_data = &(const struct clk_parent_data) {
> +				.fw_name = "xo",
> +			},
> +			.num_parents = 1,
> +			.ops = &clk_alpha_pll_stromer_ops,
> +		},
> +	},
> +};
> +
> +static const struct alpha_pll_config ipq5332_pll_config = {
> +	.l = 0x3e,
> +	.config_ctl_val = 0x4001075b,
> +	.config_ctl_hi_val = 0x304,
> +	.main_output_mask = BIT(0),
> +	.aux_output_mask = BIT(1),
> +	.early_output_mask = BIT(3),
> +	.alpha_en_mask = BIT(24),
> +	.status_val = 0x3,
> +	.status_mask = GENMASK(10, 8),
> +	.lock_det = BIT(2),
> +	.test_ctl_hi_val = 0x00400003,
> +};
> +
>  static const struct alpha_pll_config ipq6018_pll_config = {
>  	.l = 0x37,
>  	.config_ctl_val = 0x240d4828,
> @@ -69,16 +112,25 @@ static const struct alpha_pll_config ipq8074_pll_config = {
>  };
>  
>  struct apss_pll_data {
> +	int pll_type;
>  	struct clk_alpha_pll *pll;
>  	const struct alpha_pll_config *pll_config;
>  };
>  
> +static struct apss_pll_data ipq5332_pll_data = {
> +	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
> +	.pll = &ipq_pll_stromer_plus,
> +	.pll_config = &ipq5332_pll_config,
> +};
> +
>  static struct apss_pll_data ipq8074_pll_data = {
> +	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
>  	.pll = &ipq_pll_huayra,
>  	.pll_config = &ipq8074_pll_config,
>  };
>  
>  static struct apss_pll_data ipq6018_pll_data = {
> +	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
>  	.pll = &ipq_pll_huayra,
>  	.pll_config = &ipq6018_pll_config,
>  };
> @@ -111,7 +163,10 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
>  	if (!data)
>  		return -ENODEV;
>  
> -	clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
> +	if (data->pll_type == CLK_ALPHA_PLL_TYPE_HUAYRA)
> +		clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
> +	else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
> +		clk_stromer_pll_configure(data->pll, regmap, data->pll_config);
>  
>  	ret = devm_clk_register_regmap(dev, &data->pll->clkr);
>  	if (ret)
> @@ -122,6 +177,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id apss_ipq_pll_match_table[] = {
> +	{ .compatible = "qcom,ipq5332-a53pll", .data = &ipq5332_pll_data },
>  	{ .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
>  	{ .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
>  	{ }