Re: [PATCH v6 0/8] Add support for sam9x60 curiosity board

[Claudiu.Beznea]

On 07.02.2023 13:06, Durai Manickam KR wrote:
> This series of patches is meant to address the following:
> - Moving of flexcom definitions from board file to SoC file and
>    some minor changes to its properties.
> - Add support for the new sam9x60 curiosity board based on the
>    existing sam9x60 SoC.
> 

[ ... ]

> 
> Durai Manickam KR (3):
>   ARM: dts: at91: sam9x60: fix spi4 node
>   dt-bindings: arm: at91: Add info on sam9x60 curiosity
>   ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60
>     curiosity board
> 
> Manikandan Muralidharan (5):
>   ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom
>     functions
>   ARM: dts: at91: sam9x60: move flexcom definitions
>   ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
>   ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
>   ARM: dts: at91: sam9x60: Add missing flexcom definitions
> 
>  .../devicetree/bindings/arm/atmel-at91.yaml   |   6 +-
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/at91-sam9x60_curiosity.dts  | 503 ++++++++++++++
>  arch/arm/boot/dts/at91-sam9x60ek.dts          |  50 +-
>  arch/arm/boot/dts/sam9x60.dtsi                | 622 ++++++++++++++++++
>  5 files changed, 1140 insertions(+), 42 deletions(-)
>  create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
> 

Applied to at91-dt, thanks!