[RFC,v14 0/5] Add DT based PCIe wake support in PCI core driver
From: Manikanta Maddireddy
Date: Wed Feb 08 2023 - 06:19:55 EST
Below series [1] attempted to support DT based PCIe wake feature in generic
PCI core driver. This series was left at v13 and final comments are not
addressed. I am continuing this series from v14 by addressing all comments
in v13. I dropped rockchip device tree patch because I don't have hardware
to verify it. Instead, I verified these patches on NVIDIA Jetson AGX Orin
Developer Kit and included its device tree changes in this series.
[1] https://lore.kernel.org/all/20171226023646.17722-1-jeffy.chen@xxxxxxxxxxxxxx/
Changes in v14:
Updated commit message for DT bindings patch to reflect that DT properties
are tied to PCI-PCI Bridge.
Addressed review comments on PCI interrupt parsing patch.
Dropped rockchip device tree patch.
Added Jetson AGX OrinDeveloper Kit device tree and Tegra PMC patches.
Changes in v13:
Fix compiler error reported by kbuild test robot <fengguang.wu@xxxxxxxxx>
Changes in v12:
Only add irq definitions for PCI devices and rewrite the commit message.
Enable the wake irq in noirq stage to avoid possible irq storm.
Changes in v11:
Address Brian's comments.
Only support 1-per-device PCIe WAKE# pin as suggested.
Move to pcie port as Brian suggested.
Changes in v10:
Use device_set_wakeup_capable() instead of device_set_wakeup_enable(),
since dedicated wakeirq will be lost in device_set_wakeup_enable(false).
Changes in v9:
Add section for PCI devices and rewrite the commit message.
Fix check error in .cleanup().
Move dedicated wakeirq setup to setup() callback and use
device_set_wakeup_enable() to enable/disable.
Rewrite the commit message.
Changes in v8:
Add optional "pci", and rewrite commit message.
Add pci-of.c and use platform_pm_ops to handle the PCIe WAKE# signal.
Rewrite the commit message.
Changes in v7:
Move PCIE_WAKE handling into pci core.
Changes in v6:
Fix device_init_wake error handling, and add some comments.
Changes in v5:
Move to pci.txt
Rebase.
Use "wakeup" instead of "wake"
Changes in v3:
Fix error handling.
Changes in v2:
Use dev_pm_set_dedicated_wake_irq.
Jeffy Chen (3):
dt-bindings: PCI: Add definition of PCIe WAKE# irq and PCI irq
of/irq: Adjust of_pci_irq parsing for multiple interrupts
PCI / PM: Add support for the PCIe WAKE# signal for OF
Manikanta Maddireddy (2):
arm64: tegra: Add PCIe port node with PCIe WAKE# for C1 controller
soc/tegra: pmc: Add Tegra234 PCIe wake event
Documentation/devicetree/bindings/pci/pci.txt | 8 +++
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 11 ++++
drivers/pci/of.c | 63 ++++++++++++++++++-
drivers/pci/pci-driver.c | 10 +++
drivers/pci/pci.c | 7 +++
drivers/pci/pci.h | 8 +++
drivers/soc/tegra/pmc.c | 1 +
7 files changed, 105 insertions(+), 3 deletions(-)
--
2.25.1