[PATCH] tpm: add vendor flag to command code validation

[Julien Gomes]

Some TPM 2.0 devices have support for additional commands which are not
part of the TPM 2.0 specifications.
These commands are identified with bit 29 of the 32 bits command codes.
Contrarily to other fields of the TPMA_CC spec structure used to list
available commands, the Vendor flag also has to be present in the
command code itself (TPM_CC) when called.

Add this flag to tpm_find_cc() mask to prevent blocking vendor command
codes that can actually be supported by the underlying TPM device.

Signed-off-by: Julien Gomes <julien@xxxxxxxxxx>
---
 drivers/char/tpm/tpm2-cmd.c | 4 +++-
 include/linux/tpm.h         | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 65d03867e114..93545be190a5 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -777,10 +777,12 @@ int tpm2_auto_startup(struct tpm_chip *chip)
 
 int tpm2_find_cc(struct tpm_chip *chip, u32 cc)
 {
+	u32 cc_mask;
 	int i;
 
+	cc_mask = 1 << TPM2_CC_ATTR_VENDOR | GENMASK(15, 0);
 	for (i = 0; i < chip->nr_commands; i++)
-		if (cc == (chip->cc_attrs_tbl[i] & GENMASK(15, 0)))
+		if (cc == (chip->cc_attrs_tbl[i] & cc_mask))
 			return i;
 
 	return -1;
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index dfeb25a0362d..4dc97b9f65fb 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -265,6 +265,7 @@ enum tpm2_startup_types {
 enum tpm2_cc_attrs {
 	TPM2_CC_ATTR_CHANDLES	= 25,
 	TPM2_CC_ATTR_RHANDLE	= 28,
+	TPM2_CC_ATTR_VENDOR	= 29,
 };
 
 #define TPM_VID_INTEL    0x8086
-- 
2.39.1