[PATCH 11/11] ARM: debug: removal of STiH415/STiH416 related debug uart

[Alain Volmat]

Remove the entries related to the debug uart addresses for
platforms STiH415 and STiH416 which are no more supported.

Signed-off-by: Alain Volmat <avolmat@xxxxxx>
---
 arch/arm/Kconfig.debug | 28 ----------------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c345775f035b..e7307eeb2abb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1205,26 +1205,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on ST SPEAr13xx based platforms.
 
-	config DEBUG_STIH41X_ASC2
-		bool "Use StiH415/416 ASC2 UART for low-level debug"
-		depends on ARCH_STI
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config DEBUG_STIH41X_SBC_ASC1
-		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
-		depends on ARCH_STI
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
-
 	config DEBUG_STIH418_SBC_ASC0
 		bool "Use StiH418 SBC ASC0 UART for low-level debug"
 		depends on ARCH_STI
@@ -1597,8 +1577,6 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
 	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sti.S" if DEBUG_STIH41X_ASC2
-	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
 	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
 	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1728,9 +1706,7 @@ config DEBUG_UART_PHYS
 	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfe800000 if ARCH_IOP32X
-	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
 	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
@@ -1759,7 +1735,6 @@ config DEBUG_UART_PHYS
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
-		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
 		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
@@ -1827,9 +1802,7 @@ config DEBUG_UART_VIRT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
 	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
-	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfdd32000 if DEBUG_STIH41X_ASC2
 	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
@@ -1871,7 +1844,6 @@ config DEBUG_UART_VIRT
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
-		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
 		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
-- 
2.34.1