Re: [PATCH 1/3] HID: apple-ibridge: Add Apple iBridge HID driver for T1 chip.

[Benjamin Tissoires]

On Fri, Feb 10, 2023 at 9:30 AM Aditya Garg <gargaditya08@xxxxxxxx> wrote:
>
>
>
> > On 10-Feb-2023, at 10:26 AM, Thomas Weißschuh <thomas@xxxxxxxx> wrote:
> >
> > Hi,
> >
> > some comments inline.
> >
> > On Fri, Feb 10, 2023 at 03:43:24AM +0000, Aditya Garg wrote:
> >> From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
> >>
> >> The iBridge device provides access to several devices, including:
> >> - the Touch Bar
> >> - the iSight webcam
> >> - the light sensor
> >> - the fingerprint sensor
> >>
> >> This driver provides the core support for managing the iBridge device
> >> and the access to the underlying devices. In particular, the
> >> functionality for the touch bar and light sensor is exposed via USB HID
> >> interfaces, and on devices with the T1 chip one of the HID devices is
> >> used for both functions. So this driver creates virtual HID devices, one
> >> per top-level report collection on each HID device (for a total of 3
> >> virtual HID devices). The sub-drivers then bind to these virtual HID
> >> devices.
> >>
> >> This way the Touch Bar and ALS drivers can be kept in their own modules,
> >> while at the same time making them look very much like as if they were
> >> connected to the real HID devices. And those drivers then work (mostly)
> >> without further changes on MacBooks with the T2 chip that don't need
> >> this driver.
> >>
> >> Signed-off-by: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
> >> [Kerem Karabay: convert to a platform driver]
> >> [Kerem Karabay: fix appleib_forward_int_op]
> >> [Kerem Karabay: rely on HID core's parsing in appleib_add_device]
> >> Signed-off-by: Kerem Karabay <kekrby@xxxxxxxxx>
> >> Signed-off-by: Aditya Garg <gargaditya08@xxxxxxxx>
> >> ---
> >> drivers/hid/Kconfig         |  15 +
> >> drivers/hid/Makefile        |   1 +
> >> drivers/hid/apple-ibridge.c | 610 ++++++++++++++++++++++++++++++++++++
> >> drivers/hid/apple-ibridge.h |  15 +
> >> drivers/hid/hid-ids.h       |   1 +
> >> drivers/hid/hid-quirks.c    |   3 +
> >> 6 files changed, 645 insertions(+)
> >> create mode 100644 drivers/hid/apple-ibridge.c
> >> create mode 100644 drivers/hid/apple-ibridge.h
> >>
> >
> >>
> >> +}
> >> +
> >> +static int appleib_ll_raw_request(struct hid_device *hdev,
> >> +   unsigned char reportnum, __u8 *buf,
> >> +   size_t len, unsigned char rtype, int reqtype)
> >> +{
> >> + struct appleib_hid_dev_info *hdev_info = hdev->driver_data;
> >> +
> >> + return hid_hw_raw_request(hdev_info->hdev, reportnum, buf, len, rtype,
> >> +   reqtype);
> >> +}
> >> +
> >> +static int appleib_ll_output_report(struct hid_device *hdev, __u8 *buf,
> >> +     size_t len)
> >> +{
> >> + struct appleib_hid_dev_info *hdev_info = hdev->driver_data;
> >> +
> >> + return hid_hw_output_report(hdev_info->hdev, buf, len);
> >> +}
> >> +
> >> +static struct hid_ll_driver appleib_ll_driver = {
> >> + .start = appleib_ll_start,
> >> + .stop = appleib_ll_stop,
> >> + .open = appleib_ll_open,
> >> + .close = appleib_ll_close,
> >> + .power = appleib_ll_power,
> >> + .parse = appleib_ll_parse,
> >> + .request = appleib_ll_request,
> >> + .wait = appleib_ll_wait,
> >> + .raw_request = appleib_ll_raw_request,
> >> + .output_report = appleib_ll_output_report,
> >> +};
> >
> > const
>
> Are you sure about const here?
>
> >
> >> +
> >> + if (udev->actconfig->desc.bConfigurationValue != APPLEIB_BASIC_CONFIG) {
> >> + rc = usb_driver_set_configuration(udev, APPLEIB_BASIC_CONFIG);
> >> + return rc ? rc : -ENODEV;
> >> + }
> >> +
> >> + rc = hid_parse(hdev);
> >> + if (rc) {
> >> + hid_err(hdev, "ib: hid parse failed (%d)\n", rc);
> >> + goto error;
> >> + }
> >> +
> >> + rc = hid_hw_start(hdev, HID_CONNECT_DRIVER);
> >> + if (rc) {
> >> + hid_err(hdev, "ib: hw start failed (%d)\n", rc);
> >> + goto error;
> >> + }
> >> +
> >> + hdev_info = appleib_add_device(hdev);
> >> + if (IS_ERR(hdev_info)) {
> >> + rc = PTR_ERR(hdev_info);
> >> + goto stop_hw;
> >> + }
> >> +
> >> + hid_set_drvdata(hdev, hdev_info);
> >> +
> >> + rc = hid_hw_open(hdev);
> >> + if (rc) {
> >> + hid_err(hdev, "ib: failed to open hid: %d\n", rc);
> >> + goto remove_dev;
> >> + }
> >> +
> >> + return 0;
> >> +
> >> +remove_dev:
> >> + appleib_remove_device(hdev);
> >> +stop_hw:
> >> + hid_hw_stop(hdev);
> >> +error:
> >> + return rc;
> >> +}
> >> +
> >> +static void appleib_hid_remove(struct hid_device *hdev)
> >> +{
> >> + hid_hw_close(hdev);
> >> + appleib_remove_device(hdev);
> >> + hid_hw_stop(hdev);
> >> +}
> >> +
> >> +static const struct hid_device_id appleib_hid_ids[] = {
> >> + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IBRIDGE) },
> >> + { },
> >> +};
> >> +
> >> +static struct hid_driver appleib_hid_driver = {
> >> + .name = "apple-ibridge-hid",
> >> + .id_table = appleib_hid_ids,
> >> + .probe = appleib_hid_probe,
> >> + .remove = appleib_hid_remove,
> >> + .raw_event = appleib_hid_raw_event,
> >> + .report_fixup = appleib_report_fixup,
> >> +#ifdef CONFIG_PM
> >> + .suspend = appleib_hid_suspend,
> >> + .resume = appleib_hid_resume,
> >> + .reset_resume = appleib_hid_reset_resume,
> >> +#endif
> >> +};
> >
> > const
>
> Are you sure you want to do const here, cause other hid-drivers are NOT using const.

It is scheduled for 6.3:
https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/log/?h=for-6.3/hid-core

So yes, please make them const.

Cheers,
Benjamin

>
> >> +
> >> +static struct appleib_device *appleib_alloc_device(struct platform_device *pdev)
> >> +{
> >> + struct appleib_device *ib_dev;
> >> + acpi_status sts;
>