Re: [PATCH 0/6 v2] tracing/histograms: Pass stacktrace from synthetic start event to end event

From: Tom Zanussi
Date: Fri Feb 10 2023 - 16:25:35 EST


Hi Steve,

On Tue, 2023-01-17 at 10:21 -0500, Steven Rostedt wrote:
> I finally got around to implementing what I've been wanting to do for
> a long
> time! That is to pass stacktraces from the start to the end event of
> a
> synthetic event. Specifically, I need to get the stacktrace of a task

Hey, this is really great! Thanks for doing this, and sorry I haven't
gotten around to looking at it until now.

Anyway, while playing with it I found a few things that didn't work as
expected, and will send a few patches with some fixes shortly.

Thanks again, this is really useful!

Tom





> as it
> schedules out, but I don't want to see it until it schedules back in
> and I
> check the timings to show that it is longer than normal. That is now
> done
> with:
>
>  # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' >
> dynamic_events
>  # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace 
> if prev_state == 2' >> events/sched/sched_switch/trigger
>  # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-
> $ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >>
> events/sched/sched_switch/trigger
>
> The above creates a synthetic event that will trigger on the max
> delta of a
> task blocked in an uninterruptible state. It will show you the stack
> trace
> of where that occurred!
>
>  # echo 1 > events/synthetic/block_lat/enable
>  # ls -lR > /dev/null
>  # cat trace
>
> # tracer: nop
> #
> # entries-in-buffer/entries-written: 2/2   #P:8
> #
> #                                _-----=> irqs-off/BH-disabled
> #                               / _----=> need-resched
> #                              | / _---=> hardirq/softirq
> #                              || / _--=> preempt-depth
> #                              ||| / _-=> migrate-disable
> #                              |||| /     delay
> #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
> #              | |         |   |||||     |         |
>           <idle>-0       [005] d..4.   521.164922: block_lat: pid=0
> delta=8322 stack=STACK:
> => __schedule+0x448/0x7b0
> => schedule+0x5a/0xb0
> => io_schedule+0x42/0x70
> => bit_wait_io+0xd/0x60
> => __wait_on_bit+0x4b/0x140
> => out_of_line_wait_on_bit+0x91/0xb0
> => jbd2_journal_commit_transaction+0x1679/0x1a70
> => kjournald2+0xa9/0x280
> => kthread+0xe9/0x110
> => ret_from_fork+0x2c/0x50 
>
>            <...>-2       [004] d..4.   525.184257: block_lat: pid=2
> delta=76 stack=STACK:
> => __schedule+0x448/0x7b0
> => schedule+0x5a/0xb0
> => schedule_timeout+0x11a/0x150
> => wait_for_completion_killable+0x144/0x1f0
> => __kthread_create_on_node+0xe7/0x1e0
> => kthread_create_on_node+0x51/0x70
> => create_worker+0xcc/0x1a0
> => worker_thread+0x2ad/0x380
> => kthread+0xe9/0x110
> => ret_from_fork+0x2c/0x50
>
> Changes since v1:
> https://lore.kernel.org/linux-trace-kernel/20230117044010.838685230@xxxxxxxxxxx/
>
> - Fixed an issue with passing a stacktrace variable to another
> variable.
>
> - Can now use the stacktrace in the histogram as well:
>
>   # echo 'hist:delta.buckets=100,stack.stacktrace:sort=delta' >
> events/synthetic/block_lat/trigger
>   # cat events/synthetic/block_lat/hist
>  
>   # event histogram
>   #
>   # trigger info:
> hist:keys=delta.buckets=100,stacktrace:vals=hitcount:sort=delta.bucke
> ts=100:size=2048 [active]
>   #
>    
>   { delta: ~ 0-99, stacktrace:     
>            event_hist_trigger+0x464/0x480
>            event_triggers_call+0x52/0xe0
>            trace_event_buffer_commit+0x193/0x250
>            trace_event_raw_event_sched_switch+0xfc/0x150
>            __traceiter_sched_switch+0x41/0x60
>            __schedule+0x448/0x7b0
>            schedule_idle+0x26/0x40
>            cpu_startup_entry+0x19/0x20
>            start_secondary+0xed/0xf0
>            secondary_startup_64_no_verify+0xe0/0xeb
>   } hitcount:          6
>   { delta: ~ 0-99, stacktrace:
>            event_hist_trigger+0x464/0x480
>            event_triggers_call+0x52/0xe0
>            trace_event_buffer_commit+0x193/0x250
>            trace_event_raw_event_sched_switch+0xfc/0x150
>            __traceiter_sched_switch+0x41/0x60
>            __schedule+0x448/0x7b0
>            schedule_idle+0x26/0x40
>            cpu_startup_entry+0x19/0x20
>            __pfx_kernel_init+0x0/0x10
>            arch_call_rest_init+0xa/0x24
>            start_kernel+0x964/0x98d
>            secondary_startup_64_no_verify+0xe0/0xeb
>   } hitcount:          3
> [..]
>   { delta: ~ 8500-8599, stacktrace:
>            event_hist_trigger+0x464/0x480
>            event_triggers_call+0x52/0xe0
>            trace_event_buffer_commit+0x193/0x250
>            trace_event_raw_event_sched_switch+0xfc/0x150
>            __traceiter_sched_switch+0x41/0x60
>            __schedule+0x448/0x7b0
>            schedule_idle+0x26/0x40
>            cpu_startup_entry+0x19/0x20
>            start_secondary+0xed/0xf0
>            secondary_startup_64_no_verify+0xe0/0xeb
>   } hitcount:          1
>
>   Totals:
>       Hits: 89
>       Entries: 11
>       Dropped: 0
>
>
>
> Steven Rostedt (Google) (6):
>       tracing: Simplify calculating entry size using struct_size()
>       tracing: Allow stacktraces to be saved as histogram variables
>       tracing: Allow synthetic events to pass around stacktraces
>       tracing/histogram: Add stacktrace type
>       tracing/histogram: Document variable stacktrace
>       tracing/histogram: Add simple tests for stacktrace usage of
> synthetic events
>
> ----
>  Documentation/trace/histogram.rst                  | 129
> +++++++++++++++++++++
>  kernel/trace/trace.c                               |   2 +-
>  kernel/trace/trace.h                               |   4 +
>  kernel/trace/trace_events_hist.c                   |  63 +++++++---
>  kernel/trace/trace_events_synth.c                  |  83
> ++++++++++++-
>  kernel/trace/trace_synth.h                         |   1 +
>  .../inter-event/trigger-synthetic-event-stack.tc   |  24 ++++
>  .../inter-event/trigger-synthetic-event-syntax.tc  |   6 +
>  8 files changed, 294 insertions(+), 18 deletions(-)
>  create mode 100644
> tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-
> synthetic-event-stack.tc